Thingiverse
RebeliX with prusa I3mk2 extruder and 8mm sensor upgrade by yourdy1
by Thingiverse
Last crawled date: 3 years ago
files to make a 3030 rebeliX and prusa I3 amalgamation :)
Also many thanks to Tom from Tom3dguide for putting this new improved idler.
You will need to print the Y bearing housing three times, and the Y rod holder 4 times, all other parts need to be printed only once
Here are the parts you will need
Also if making this machine larger make sure to take account that the extrusion, Acme rods, smooth rods and belts will need added lengths.
(4) M2 x 10mm bolts
(12) M3 x 10mm bolts
(11) M3 x 16mm bolts
(8) M3 x 20mm bolts
(3) M3 x 25mm bolts
(4) M3 x 30mm bolts
(3) M3 x 40mm bolts
(1) M3 x 45mm bolts
(32) M6 12mm bolts
(2) GT2 teethed belt pulley
(2) 30/30 m6 Hammerhead Nuts
(30) 30/30M6 (slide in) T-nuts
(10) M3 Nuts
(4) M3 Square Nuts
(2) Smooth M8 rods 370mm (X)
(2) Smooth M8 rods 360mm (Y)
(2) Smooth M8 rods 320mm (Z)
(3) 30/30 extrusion 360 mm X
(2) 30/30 extrusion 330 mm Z
(2) 30/30 extrusion 320 mm Y
(8) 30/30 Aluminum corner brackets
(4) 623zz Bearings
(1) 625zz bearing (make sure it is double Z)
(7) LM8uu bearings
(3) LM8LUU bearings for the bed, or you can replace them with extra 6 LM8UU
(3) Nema 17 or (you will need five motors if you decide not to use the integrated ones below)
, also you will need Tr8x8 rods for the z axis 300mm you will need two and the nuts)
(2) Nema 17 m8 acme lead screw integrated 300mm
2 meters GT2 belt
(2) Endstops
(1) PCB heated bed 8x8 or Aluminum heated bed with thermistor (or whatever size you are using, remember you will have to cut the 30/30 extrusion and the rods accordingly)
(1) Bed carriage (RepRap Champion)
(4) M3 x 10mm aluminum spacers
Zip ties & wire
(1) E3D V6 J-head or Clone with thermistor and heathing element ( wired )
(1) 18mm Diameter 8 mm Proximity Sensor 5-36V or 6-36
(1) MK8 Filament Gear
(2) Springs (40mm length and 3.5 or 4mm Inner diameter)
(1) 30mm fan ( the voltage you need it to be depends on which power supply you are using, usually the most common is 12V)
(1) 50mm brushless blower fan (people call them laptop fans, I call them the sling blade, mhhmhh.)
Also many thanks to Tom from Tom3dguide for putting this new improved idler.
You will need to print the Y bearing housing three times, and the Y rod holder 4 times, all other parts need to be printed only once
Here are the parts you will need
Also if making this machine larger make sure to take account that the extrusion, Acme rods, smooth rods and belts will need added lengths.
(4) M2 x 10mm bolts
(12) M3 x 10mm bolts
(11) M3 x 16mm bolts
(8) M3 x 20mm bolts
(3) M3 x 25mm bolts
(4) M3 x 30mm bolts
(3) M3 x 40mm bolts
(1) M3 x 45mm bolts
(32) M6 12mm bolts
(2) GT2 teethed belt pulley
(2) 30/30 m6 Hammerhead Nuts
(30) 30/30M6 (slide in) T-nuts
(10) M3 Nuts
(4) M3 Square Nuts
(2) Smooth M8 rods 370mm (X)
(2) Smooth M8 rods 360mm (Y)
(2) Smooth M8 rods 320mm (Z)
(3) 30/30 extrusion 360 mm X
(2) 30/30 extrusion 330 mm Z
(2) 30/30 extrusion 320 mm Y
(8) 30/30 Aluminum corner brackets
(4) 623zz Bearings
(1) 625zz bearing (make sure it is double Z)
(7) LM8uu bearings
(3) LM8LUU bearings for the bed, or you can replace them with extra 6 LM8UU
(3) Nema 17 or (you will need five motors if you decide not to use the integrated ones below)
, also you will need Tr8x8 rods for the z axis 300mm you will need two and the nuts)
(2) Nema 17 m8 acme lead screw integrated 300mm
2 meters GT2 belt
(2) Endstops
(1) PCB heated bed 8x8 or Aluminum heated bed with thermistor (or whatever size you are using, remember you will have to cut the 30/30 extrusion and the rods accordingly)
(1) Bed carriage (RepRap Champion)
(4) M3 x 10mm aluminum spacers
Zip ties & wire
(1) E3D V6 J-head or Clone with thermistor and heathing element ( wired )
(1) 18mm Diameter 8 mm Proximity Sensor 5-36V or 6-36
(1) MK8 Filament Gear
(2) Springs (40mm length and 3.5 or 4mm Inner diameter)
(1) 30mm fan ( the voltage you need it to be depends on which power supply you are using, usually the most common is 12V)
(1) 50mm brushless blower fan (people call them laptop fans, I call them the sling blade, mhhmhh.)
Similar models
thingiverse
free
Prusa i3 MK2 Remix (2020 profile) by brydon1593
...h)
main board
rumba or ramps or anything you like
frame
2020 all profiles
2 x 600mm profile
5 x 500mm profile
8 x corner brackets
thingiverse
free
Rusa bowden extruder gear by urusa
...tes the m5 bolts.
the shaft is fixed to the motor rotation.
secure the mk7 extrusion gear to the m5 bolts.
the gear ratio is 1/3.
thingiverse
free
PrintrMatic 3D printer by thehair
...astruder)
pancake stepper nema 17 20mm (stepperonline)
other
various m3 and m4 bolts
m3 brass inserts used on all printed parts.
thingiverse
free
CUBICON STYLE SPOOL-HOLDER, BEARINGS, M8 THREADED ROD by 77-17
... 130mm threaded rod (uxcell1.25mm pitch m8 x 130mm threaded rod bar)
3 of m8 nuts 13mm x 7mm
2 of 608zz bearings
thread locker
thingiverse
free
Portabee Z Rod Stabilizer by JamesRX
...
trying to stabilize the vibration of z rod.
work with:
606z bearing x 2 (diameter17mm)
9.5mm hollow rod
m3 10mm screw/nut x 4
thingiverse
free
Prusa i3 Y Axis Bearing Rod Support by henryarnold
...mm cap screw and nut for the clamp. you'll also need the captive nut used with the extrusion which came with the printer kit.
thingiverse
free
simple Z-rod knob by saiki0017
...e z-rod knob by saiki0017
thingiverse
knob for a z-axis simple rod,
you will need m3 bolts 10mm and m3 nuts to secure the knobs.
thingiverse
free
Spool holder for HyperCube Evolution by Alderoth
...ted twice
assembly
you will need :
4 f628zz ball bearings
200mm m8 threaded rod
1 m8 butterfly nut
3 standard m8 nuts
4 m8 washer
thingiverse
free
Plywoodbot by Workbench3D
...com/redirect/cpa/o/oe7al6eh95yvt1zqcg2mn3377l58jwtp/
2 x 330mm
2 x 380mm
2 x 400mm
2 x 624zz ball bearing
1 x 608zz ball bearing
thingiverse
free
Ender 5 Z axis supports
...e
you need:
2 m3 nuts / bolts
4 m4 nuts / bolts of 25 mm
4 60 mm m4 nuts / bolts
1 round aluminum 7.5mm diameter, 1 meter length
Yourdy1
thingiverse
free
Sarah & Duck by yourdy1
...ingiverse
this is a quick model of sarah from the show sarah and duck, made with tinkercad while i was working on something else
thingiverse
free
prusa I3 y motor mount by yourdy1
...prusa i3 y motor mount by yourdy1
thingiverse
prusa i3 y motor mount upgrade.
thingiverse
free
Kindee active latch nipple holder by yourdy1
...kindee active latch nipple holder by yourdy1
thingiverse
i printed this to hold kiinde nipples for baby bottles.
thingiverse
free
Prusa I3 acme leadscrew X axis by yourdy1
...prusa i3 acme leadscrew x axis by yourdy1
thingiverse
x axis upgrade to leadscrew any prusa i3 clone
thingiverse
free
Prusa I3Mk.2 extruder for 8mm sensor(18mm) by yourdy1
...ensor(18mm) by yourdy1
thingiverse
this is the prusa i3 mk.2 carriage and extruder with changes to take the 8mm proximity sensor
Rebelix
thingiverse
free
Foot For RebeliX by dlaguerre
...elix bottom plates.
it is designed for 3mm screws.
it can be used on prusa i3 mk2-x, or other 3d printer based on rebelix frame.
thingiverse
free
RebeliX by Kissman
...ompiling stl from source for our 3d printer. i will add more parts later...
author of source files: http://reprap4u.cz/rebelix/
thingiverse
free
RebeliX X2 TR8x8 by olihenbeznadeje
...ake the rebelix x2 printer to trapezoidal screws tr8x8.
other parts are the same as in github.https://github.com/reprap4u/rebelix
thingiverse
free
RebeliX X2 RJ4JP-01-08 by olihenbeznadeje
...rebelix x2 rj4jp-01-08 by olihenbeznadeje
thingiverse
rebelix x2 igus rj4jp-01-08 holder.
https://github.com/reprap4u/rebelix
thingiverse
free
RebeliX X2 by Kissman
...entire printer author: martin neruda
look here for psu cover with iec and switch holes: http://www.thingiverse.com/thing:1137993
thingiverse
free
Axial 50x50 fan holder for Rebelix printer by JenikBarchov
...axial 50x50 fan holder for rebelix printer by jenikbarchov
thingiverse
fan holder for rebelix printer.
thingiverse
free
RebeliX X2 Dual Extruder by Kissman
...//github.com/reprap4u/rebelix
homepage: http://reprap4u.cz
author: martin neruda
3d model of entire printer author: martin neruda
thingiverse
free
RebeliX X2 80x80mm fan holder by dolda
... dolda
thingiverse
80x80 mm print cooling fan holder for rebelix x2
holes for m3 bolts, fan bolts are screwed directly into part
thingiverse
free
RebeliX induction probe holder by Nemesis94
... modified screw holes
added v3: improved construction, additional model to print without support (changed orientation + redesign)
thingiverse
free
Rebelix X2 Electronics Cover With 40mm Fan by Nitrogen777
...iverse
i have a rebelix x2 and the electronics needed cooling and there was no place to put a fan so i made this for my printer.
I3Mk2
thingiverse
free
Spool Holder for Prusa i3Mk2 by fx137
...er for prusa i3mk2 by fx137
thingiverse
spool roll for prusa i3 mk2s, inspired by the spoll roll holder provided with the i3mk3
thingiverse
free
PRUSA I3MK2S Spool Extension Rod by Briwilson88
... prusa spool holders. 9" rod spans the complete top of the prusa i3 mk2s top rail and is capable of holding three spools.
thingiverse
free
Prusa i3Mk2S Filament Guide by RayOfSunshine
...up, but the filament does feed at +x max and +z max.
i use my spool support a-frame with this (www.thingiverse.com/thing:2536625)
thingiverse
free
Prusa i3Mk2S Filament Guide for Side Feed by RayOfSunshine
...h remix²
www.thingiverse.com/thing:2538819
i no longer use this myself. this is what i use now:
www.thingiverse.com/thing:2536629
thingiverse
free
E3Dv6 40mm Fan Duct Mod for Titan i3Mk2 upgrade by BilboX
...sing through the entry left by the mount and the nozzle ducts.
i also add the 123d source for this mod, if you need to modify it.
thingiverse
free
Dyson toolholder by ollma517
...dyson toolholder by ollma517 thingiverse prusa i3mk2 in fast mode takes 6h40min. enjoy...
thingiverse
free
lidl plane motor mount by christerroni
...christerroni thingiverse lidl plane motor mount made on prussia i3mk2 printed in...
thingiverse
free
Wall allen wrench toolbox by 3dfernando
...by 3dfernando thingiverse allen wrench holder for a prusa i3mk2. wall-mount config, works for any wall. has a caliper...
thingiverse
free
Prusa i3 MK Fillament guide
...fillament guide thingiverse a fillament guide that attaches to i3mk2 chassis with a 45degrees angle to assist with fillament...
thingiverse
free
Spatula Handle Redux by Deadpaul
...down without support. printed in petg on my prusa i3mk2 with 25% honeycomb...
Upgrade
turbosquid
$15
Upgraded Glock
...e 3d model upgraded glock for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1185950)
3ddd
$1
Calligaris / UPGRADE
...calligaris / upgrade
3ddd
calligaris
c материалом
3d_export
free
cz upgrade
...cz upgrade
3dexport
https://www.buymeacoffee.com/mestrezen3d https://linktr.ee/mestrezen3
turbosquid
$80
Custer Tank upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Domestos 1 upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Upgraded tea cup
...upgraded tea cup
3dexport
a cup with an unusual design and a unique shape for a more enjoyable tea experience
3d_export
$8
dixy outlander classic style upgraded poplar wood lounge chair
...utlander classic style upgraded poplar wood lounge chair
3dexport
dixy outlander classic style upgraded poplar wood lounge chair
turbosquid
free
AK-12 + Upgrades low-poly 3D model
...ow-poly 3d model for download as fbx, blend, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1501145)
evermotion
$700
Upgrade from V-ray 1.5 to 3.5 for 3ds max
...here is no need to purchase a new dongle - your current dongles will be reprogrammed to carry v-ray 3. evermotion 3d models shop.
evermotion
$300
Upgrade from V-Ray 2.0 to V-ray 3.5 for 3ds Max
... interface (gui) for editing settings on one machine and one render node for rendering on one machine. evermotion 3d models shop.
8Mm
turbosquid
$50
8MM CAMERA.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
kodak 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Brass Bush Bearing 8mm ID
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
wrench big collection from 8mm to 32mm
...llection from 8mm to 32mm for download as obj, fbx, and sldas on turbosquid: 3d models for games, architecture, videos. (1438111)
turbosquid
$1
Flexible Shaft Coupling 6mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Flexible shaft coupling 5mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
German WWII Breda MG-8mm Ammo Box (Low Poly)
...g-8mm ammo box (low poly) for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1395526)
3ddd
free
Treasures of the Sea
...treasures of the sea 3ddd бижутерия d=8mm ...
3d_export
$5
double thread screw
...thread length: 10 mm total length: 41 mm diameter: 8mm ...
3d_export
$5
large double thread screw
...thread length: 10 mm total length: 115 mm diameter: 8mm ...
Prusa
turbosquid
$2
Frame Filament Guide Clip-On for Prusa Mk3
...rame filament guide clip-on for prusa mk3 for download as stl on turbosquid: 3d models for games, architecture, videos. (1634730)
3d_export
free
prusa i3 mk3s laser mount for opt lasers
...to learn more about the blue laser technology that conceived the cutting and engraving laser heads from opt lasers, please visit:
turbosquid
free
Prusa small printer adapter holder
...er for download as ipt, skp, dwg, dxf, fbx, ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1642936)
3d_export
$30
geisha by jonathan adler
...** i did a 3d printing test in the prusa software, you can find it among the attached images.<br>exchange:<br>.blend...
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
Sensor
3d_export
free
parking sensor
...parking sensor
3dexport
car parking sensor
turbosquid
$1
Sensor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Smoke sensor
...port
smoke sensor, can be an impressive element for your projects. easy to use, realistic image, low polygon, quality materials.
3d_export
$5
Air Quality Sensor v1
...air quality sensor v1
3dexport
air quality sensor v1
3d_export
$15
float sensor
...e up render. - all parts and materials are logically named. other formats ================= - collada (.dae) - autodesk fbx - obj
turbosquid
$26
Wind sensor C
...free 3d model wind sensor c for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328943)
turbosquid
$26
Wind sensor B
...free 3d model wind sensor b for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1328168)
3d_export
$5
ultrasound sensor
...ivers convert ultrasound into electrical signals, and transceivers can both transmit and receive ultrasound. export in: -obj -fbx
3ddd
free
Вытяжка Shindo pallada sensor
... вытяжка
вытяжка shindo pallada sensor. в двух размерах - 600 и 900. текстуры в комплекте.
turbosquid
$52
Wind sensor A B C
...
royalty free 3d model wind sensor a b c for download as fbx on turbosquid: 3d models for games, architecture, videos. (1408406)
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.