Thingiverse
Realacc X210 (Lumenier QAV-X) Actioncam mount by gerdfranz
by Thingiverse
Last crawled date: 3 years ago
Since the original Realacc X210 actioncam mount isn't very well designed (plate breaks away), I designed this actioncam mount which is beeing held in place by the already existing screws.
Now there is a version for a GoPro Session available as well:http://www.thingiverse.com/thing:1776940
Tested it with semi-rigid/flex material from Real (Bioflex) and it works perfect. Crash resistence was the main concern but also in hard crashes, the go pro is held in place and the mount is not breaking.
You can use rigid material like PETG too, but certainly will break sooner on harder crashes. Haven't tested the soft version (Ninjaflex) yet, may be can be beneficial for vibration compensation. However, the semi-rigid Filament is too hard to provide vibration dampening, but usually this isn't necessary on good tuned quads.
Can be printed with and without support. Comes out a little bit nicer with support.
Not sure if this will fit the Lumenier QAV-X? Just tested in on the Realacc X210 from Banggood.
Enjoy.
Now there is a version for a GoPro Session available as well:http://www.thingiverse.com/thing:1776940
Tested it with semi-rigid/flex material from Real (Bioflex) and it works perfect. Crash resistence was the main concern but also in hard crashes, the go pro is held in place and the mount is not breaking.
You can use rigid material like PETG too, but certainly will break sooner on harder crashes. Haven't tested the soft version (Ninjaflex) yet, may be can be beneficial for vibration compensation. However, the semi-rigid Filament is too hard to provide vibration dampening, but usually this isn't necessary on good tuned quads.
Can be printed with and without support. Comes out a little bit nicer with support.
Not sure if this will fit the Lumenier QAV-X? Just tested in on the Realacc X210 from Banggood.
Enjoy.
Similar models
thingiverse
free
Realacc X210 (Lumenier QAV-X) Actioncam mount (GoPro Session) V1 by gerdfranz
...le bit nicer with support.
not sure if this will fit the lumenier qav-x? just tested in on the realacc x210 from banggood.
enjoy.
thingiverse
free
Realacc X210 (Lumenier QAV-X) Actioncam mount (Xiaomi Yi) by gerdfranz
... if it doesn't (due to different filament, printer calibration), scale down the object for 0,xx%. the holes still should fit.
thingiverse
free
Realacc X210 (Lumenier QAV-X) GoPro Session Mount by steeves
...ssion on a realacc x210 or lumenier qav-x. you can attach your gopro session with a velcro and is very solid even crash (tested).
thingiverse
free
QAV-X Realacc x210 Gopro mount by rival13
...qav-x realacc x210 gopro mount by rival13
thingiverse
simple, easy to use, actioncam mount for qav-x or realacc x210 frame.
thingiverse
free
QAV-X Realacc x210 Gopro Session mount by rival13
...pro session mount by rival13
thingiverse
gopro session mount for qav-x or realacc x210 frame.
print it on the side, no supports.
thingiverse
free
Realacc X210 (Lumenier QAV-X) COB LED mount by VinT_BLR
...
hi all. this design for realacc x210 frame https://goo.gl/lizcr8. i made some mount for cob led like this https://goo.gl/gdvtul
thingiverse
free
Lumenier QAV-X/XS Camera Support by Nobody_FPV
...n hard crashes. with the mount pushed all the way to the top of the stand offs, your fpv camera will be approximately 30 degrees.
thingiverse
free
M10 camera mount for X210 pro frame by burgi
...ves you some crash protection for your actioncam. fits the pro version of the x210 frame.
update: version without fliager added.
thingiverse
free
Realacc X210 QAV-X TBS Unify Antenna Mount (Test) by cuxx
...realacc x210 qav-x tbs unify antenna mount (test) by cuxx
thingiverse
antenna mount with a tbs unify pigtail
thingiverse
free
QAV Raelacc x210 antenna mount by bucks991
...bably can fit even on plus or pro versions but i don't know their specs.
notes:
standoff interspace 28mm
standoff height 28mm
Gerdfranz
thingiverse
free
Alcon Dailies Contact Lenses / Kontaktlinsen Reservoir by gerdfranz
...or contact lenses from the brand dailies (alcon).
platzsparender kontaktlinsen aufbewahrungsständer für dailies linsen von alcon.
thingiverse
free
Eachine LCD5802S 5802 FPV Monitor stand (sturdy) by gerdfranz
...stand (sturdy) by gerdfranz
thingiverse
a sturdy tiltable monitor stand version for the eachine lcd5802s 5802 (fpv) lcd-monitor.
thingiverse
free
Netsports Forza Gate Replacement Peg / Tent by gerdfranz
...well known forza gates in the fpv scene.
also usable for any other "peg" application like tents. this is really strong.
thingiverse
free
GoPro Lens Protector for semi flexible/rigid materials (REAL Bioflex) by gerdfranz
... materials (real bioflex) by gerdfranz
thingiverse
fits perfectly onto a gopro 3 and has a lug for extra securing the protector.
thingiverse
free
Xiaomi Yi Lens protector for semi rigid/flexible material (REAL Bioflex) by gerdfranz
...material (real bioflex) by gerdfranz
thingiverse
fits perfectly onto a xiaomi yi and has a lug for extra securing the protector.
thingiverse
free
Eachine LCD5802S 5802 FPV Monitor "hanger" by gerdfranz
...d work for others as well.
i made this to spare some space on my workbench and it also is very handy with the pan/tilt mechanism.
thingiverse
free
Eachine LCD5802S 5802 FPV Monitor stand (compact) by gerdfranz
...r me and fits perfect in the provided protection bag.
(print the stand element 2 times and connect them with the connector piece)
thingiverse
free
JST 2.00mm Battery cap (for flexible filament) Hubsan Tiny Whoop and others by gerdfranz
...pty batterys for the 1s type micro quads like the hubsan and other derivatives with 2.0mm jst connector.
for ninjaflex filaments.
thingiverse
free
MBL Lindinger.at Fliegerstuhl Scharnier/Verbinder (rechts) by gerdfranz
... und 45mm) benötigt.
https://www.lindinger.at/de/zubehoer-und-mehr/werbeartikel/mbl-pilotenstuhl-comfort-lindinger-camping-sessel
thingiverse
free
Jumper T-Lite Switch Protector + Back cover (TPU) by gerdfranz
...,2mm layer height
3 perimeters
70% infill (from 15mm, below 30%infill)
no support needed
printed with extrudr.eu medium tpu (98a)
Actioncam
turbosquid
$20
ActionCam
...
turbosquid
royalty free 3d model actioncam for download as on turbosquid: 3d models for games, architecture, videos. (1705073)
thingiverse
free
Bracket replacement for ActionCam
...bracket replacement for actioncam
thingiverse
this a replacement for a broken bracket/holder of you actioncam
thingiverse
free
ActionCAM frame for DBPower by KREIaMO
...actioncam frame for dbpower by kreiamo
thingiverse
an actioncam frame for dbpower
thingiverse
free
QUMOX Actioncam Lenscover by pcace
...e
thingiverse
qumox actioncam lenscover
just a little lenscover for the gopro copy from qumox or the hd actioncam from turnigy
thingiverse
free
Sony ActionCam Mount by MrMarklar
...sony actioncam mount by mrmarklar
thingiverse
sony actioncam mount for flat surfaces.
thingiverse
free
Motorcycle ActionCam Fork Mount
...motorcycle actioncam fork mount
thingiverse
actioncam mount for 72" mm fork.
thingiverse
free
Gimbal Actioncam Adapter by Konstruktor
...adapter specially for vtin actioncam.
and a second one for the yi 4k....
if you like my designs, you can support me via paypal/me
thingiverse
free
Stand for actioncam; 00_0 by muramoto
... muramoto
thingiverse
this is a fundamental stand for actioncam.
i will improve its function from this model.
thanks in advance.
thingiverse
free
actioncam adaptar
...actioncam adaptar
thingiverse
sj8 gimbal adaptar
infill 20%
nozzle 0.6mm (not matter)
m6 nut weightcounter
thingiverse
free
Denver actionCam Quad mount by Freezillion
...denver actioncam quad mount by freezillion
thingiverse
denver actioncam fpv racing quad mount
X210
3ddd
free
Bretz GAUDI x210
... gaudi , x210
диван фабрики bretz,коллекция gaudi\x210.материалы:красный бархат,металл
thingiverse
free
X210 Wallmount by RCFox
...x210 wallmount by rcfox
thingiverse
simple wallmount for x210 including lipocover
thingiverse
free
X210 Madcase by TheHanarion
...x210 madcase by thehanarion
thingiverse
this is an accessory for the madcase, it's built for the x210 frame
3d_sky
free
Bretz GAUDI x210
...bretz gaudi x210
3dsky
sofa factory bretz collection gaudi \ x210. material: red velvet, metal
thingiverse
free
Fin for Realacc X210
...fin for realacc x210
thingiverse
fin for realacc x210
v2: lite version with more holes for zip-tie
thingiverse
free
x210 esc protector by tvalles
...x210 esc protector by tvalles
thingiverse
an esc protector for realacc x210 pro 3k
thingiverse
free
X210 camera protection by mistyk
...x210 camera protection by mistyk
thingiverse
camera protection for x210 v+ (runcam eagle )
thingiverse
free
Buzzer for Realacc X210 by macabox
...buzzer for realacc x210 by macabox
thingiverse
front buzzer for realacc x210, buzzer measure: 12mm diameter
thingiverse
free
x210 Antennamount - Mount by RCFox
...x210 antennamount - mount by rcfox
thingiverse
antenna mount for x210
holds:
diversity antenna rx
antenna vtx
thingiverse
free
Realacc X210 by tedenz
...realacc x210 by tedenz
thingiverse
converted to dxf
Lumenier
thingiverse
free
Lumenier Taranis Gimbal Guard by Lumenier
...hard to remove them.
available for purchase at:http://www.getfpv.com/lumenier-custom-themed-gimbal-stick-protectors-set-blue.html
thingiverse
free
Lumenier Chief Turtle Fin
...lumenier chief turtle fin
thingiverse
this is a turtle mode fin for the lumenier chief racing frame.
thingiverse
free
Motorguard/Landingskid for Lumenier QAV250 by Alta1re
...motorguard/landingskid for lumenier qav250 by alta1re
thingiverse
combined motorguard and landingskid for the lumenier qav250
thingiverse
free
Marmotte DJI Lumenier AXII
...marmotte dji lumenier axii
thingiverse
prototype.
thingiverse
free
Lumenier Race Pod Session Mount by Lumenier
...f the compression within the part, that provides mounting stability to the race pod and a more secure grip of the session camera.
thingiverse
free
Ares XS Lumenier Axii Mount by HPFPV
...ares xs lumenier axii mount by hpfpv
thingiverse
ares xs lumenier axii mount
thingiverse
free
Lumenier QAV-R 2 Skid by XSImnl
...lumenier qav-r 2 skid by xsimnl
thingiverse
simple skids for the lumenier qav-r 2
thingiverse
free
Lumenier QAV-CINE Freybott Edition (2.5") Naked GoPro Mount by Lumenier
...naked-camera-v2-case-injection-molded.html
link to the frame - https://www.getfpv.com/lumenier-qav-cine-freybott-edition-2-5.html
thingiverse
free
Lumenier QAV250 G10 motor protector by MaximB
...otector for a lumenier qav250 g10 frame. easy to mount without any bolts or glue. perfect fit for the lumenier fxc2206-11 motors.
thingiverse
free
Improved Fin for Lumenier Chief Racing Quadcopter
...in for lumenier chief racing quadcopter
thingiverse
improved fin for lumenier chief racing quadcopter with integrated sma mount.
Realacc
thingiverse
free
Fin for Realacc X210
...fin for realacc x210
thingiverse
fin for realacc x210
v2: lite version with more holes for zip-tie
thingiverse
free
realacc trident cover by grblmm
...realacc trident cover by grblmm
thingiverse
y-type realacc trident cover
thingiverse
free
Realacc Real6 Gopro mount
...realacc real6 gopro mount
thingiverse
gopro mount for realacc real6 frame
thingiverse
free
Buzzer for Realacc X210 by macabox
...buzzer for realacc x210 by macabox
thingiverse
front buzzer for realacc x210, buzzer measure: 12mm diameter
thingiverse
free
Realacc protector by heliomenezes
...realacc protector by heliomenezes
thingiverse
tpu material
thingiverse
free
Realacc X210 by tedenz
...realacc x210 by tedenz
thingiverse
converted to dxf
thingiverse
free
protection ESC realacc X210 by SEVEN7KILLER
...protection esc realacc x210 by seven7killer
thingiverse
protection esc realacc x210
thingiverse
free
Realacc X210 motor protector by CoenenDaan
...realacc x210 motor protector by coenendaan
thingiverse
realacc x210 motor protector
thingiverse
free
Realacc x210 VTX case by dani1498
...realacc x210 vtx case by dani1498
thingiverse
realacc x210 vtx case
thingiverse
free
Realacc X210 / Swift Halter by sitoca
...realacc x210 / swift halter by sitoca
thingiverse
realacc x210 swift halter
Qav
thingiverse
free
QAV-R/QAV-210/QAV-180/Generic Quad Landing Pad by tes4p00ner
...qav-r/qav-210/qav-180/generic quad landing pad by tes4p00ner
thingiverse
this is a replacement qav-r landing pad.
thingiverse
free
QAV-R Antenna Tube Holder and Antenna Caps For QAV-R, QAV 210, and QAV 180 by jason51873
...caps for qav-r, qav 210, and qav 180 by jason51873
thingiverse
print this with flexible material and slide over rear stand offs.
thingiverse
free
QAV-250 by Hermes1229
...qav-250 by hermes1229
thingiverse
qav-250
thingiverse
free
Foxeer_switcher Mount for QAV-X and QAV-210 by NyeinChanZaw
... is the mount for foxeer switcher vtx. it can be used in qav 210, qav x or others which have 31mm distance between two stand off.
thingiverse
free
qav 210 by Ravvinoff
...qav 210 by ravvinoff
thingiverse
racing drone qav 210
thingiverse
free
Support Runcam Skyplus for QAV-R OR QAV 210 by Strangers
...trangers
thingiverse
support for mounting runcam skyplus on qav-r or qav 210 180.
added version with bumper for 2.1 and 2.5 lens
thingiverse
free
Lumenier Action Camera Mount Vibration Dampening Pins and Circlips (QAV-180 QAV-210 QAV-R ) by tes4p00ner
...pro 250 pin and circlips by alessandroame, in order to fit the lumenier qav-r / qav-180 / qav-210 gopro / mobius / runcam mount.
thingiverse
free
Lumenier QAV-S QAV S Hero 8 Hero8 mount by sun573
...lumenier qav-s qav s hero 8 hero8 mount by sun573
thingiverse
hero 8 mount remixed for the qav s
thingiverse
free
nox5" and qav-x and qav-r session mounts by MichaelJFPV
...nox5" and qav-x and qav-r session mounts by michaeljfpv
thingiverse
make in tpu super slow
thingiverse
free
QAV-R / QAV 210 Go Pro Mount by Mr_Anderson88
...qav-r / qav 210 go pro mount by mr_anderson88
thingiverse
printed out of tpu to absorb vibrations.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)