Reach 3D Hot End Carriage, Fan Mount, and Z Probe Carriage by ngoconwood

Last crawled date: 3 years, 1 month ago

Hot End Carriage: Removable carriage that doesn't affect the Z Probe. This design allows for quick swaps of hot ends, laser module, pen, etc. Carriages for the other items have not been designed as of yet.
Materials:
1 x 30x30mm fan
2 x M5x60 bolt
2 x M5 Nuts
2 x M3x25 Bolt
4 x M3x20 Bolt
6 x M3 Nut
Fan Mount: Uses a 50mm radial fan. The fan is held in with a M3x25 bolt.You may need to redrill and tap the hole. I printed it with the wrong hole size so I didn't have the ability to tap the hole and just used a longer M3 bolt and a nut. The reason for the hole is to allow the radial fan to pivot out of the way in order to access the M5 nut to remove the entire carriage.
Materials:
1 x 50mm radial fan
1 x M3x25 bolt
1 x M3 washer
1 x M3 Lock Washer
Z Probe Carriage: Z Probe Carriage allows micro adjustments with the M3 screw from the top and also houses the X end stop.The 4 washers are to make sure the bolt ends are flush to not interfere with the z probe.
Materials:
1 x M3x50 Bolt
1 x M3 Lock Nut
1 x #4 Screw
2 x M5x30 Bolt
4 x M5 washers
2 x M5 Nuts