Thingiverse
RDQ Mach 1 Stack Mounts BF FC & 4in1 ESC by Daubut
by Thingiverse
Last crawled date: 4 years, 5 months ago
Soft mount flight controller and 4 in 1 ESC holder for the Mach 1. Designed to hold the Betaflight FC and the Spedix 4 in 1 ESC. Holes are setup for 30.5 X 30.5 standard flight controller pattern so any flight controller and 4 in 1 ESC may be used with a little trimming.
Flight controller goes on top screws from below run up through ESC holder and right up to bottom of Flight Controller board. Do not allow mounting screws to touch flight controller.
Print in TPU infill 10% with supports.
Flight controller goes on top screws from below run up through ESC holder and right up to bottom of Flight Controller board. Do not allow mounting screws to touch flight controller.
Print in TPU infill 10% with supports.