Thingiverse

RCExplorer MiniTricopter GoPro Session Mount by luodanli
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a mount I designed for a friend. He successfully test-fit the 15 degree mount on the MiniTricopter HD camera plate, while it was in its upper, down-angled position.
The mount requires zip-ties to mount to the frame as well as a thin layer of foam under the camera and a 14mm or narrower velcro strap to restrain the camera from the top.
For a low-profile version of this design, that allows use of 20mm or narrower velcro straps, see this design http://www.thingiverse.com/thing:1675716.
This is a variation on the double camera mount I designed and fly on my Versacopter V2 (http://www.thingiverse.com/thing:1668243).
The mount requires zip-ties to mount to the frame as well as a thin layer of foam under the camera and a 14mm or narrower velcro strap to restrain the camera from the top.
For a low-profile version of this design, that allows use of 20mm or narrower velcro straps, see this design http://www.thingiverse.com/thing:1675716.
This is a variation on the double camera mount I designed and fly on my Versacopter V2 (http://www.thingiverse.com/thing:1668243).