Thingiverse
RC522 Simple Case by rboleyn
by Thingiverse
Last crawled date: 4 years, 7 months ago
Just a simple case for the generic RC522 cards. This one prints, and mounts to a surface using two flat head screws.
Printing should be straight forward. You will need 4X 3mm brass knurled inserts for the back screws, and 4X 3mm by 8mm flat head screws for the rear... the front you can use longer 3mm flat heads to attach the board.
Printing should be straight forward. You will need 4X 3mm brass knurled inserts for the back screws, and 4X 3mm by 8mm flat head screws for the rear... the front you can use longer 3mm flat heads to attach the board.