Thingiverse
RC Speed Tank Mods by evil_k
by Thingiverse
Last crawled date: 3 years ago
This is my print of Bryant87's RC Speed Tank. http://www.thingiverse.com/thing:2024364
Designed an aggressive tank tread. Only have enough links for one track so far - still printing. Shown on right side of tank. Left side is Bryant87's tank tread printed in PolyFlex. Everything else printed in PETG, including the aggressive tread links.
Tried something different on the aggressive tank tread - using 3mm ABS filament instead of the 3mmx35 bolts to hold the links together. Just used one 3mm bolt on the right track to make disassembly easier. Seems to work. Ream/clean the holes out with a 3mm drill bit. the fit on this track is very tight, so ream the center hole in the links out good.
Note: I just fried the 35t motor driving the aggressive track. Had the tank stuck nose down in a tough spot and could not turn the track.
Made a spacer for the motor to move it away from the drive sprocket 2mm. The drive gear on the motor was in touch with the drive sprocket.
My print of the stock track links were a bit sloppy fitting. Have printed some spacer/rings to go on the front idler to increase the diameter 4mm (IdlerRing-2mm-solid). Have also included IdlerRing-2.5mm-solid to increase the diameter by 5mm if required. These fit my idler pulley snug enough without any adhesive.
Suggest use 55t motors!
Print track links with support. I printed the track link with the tread side down (it will look ugly with the support) since more important to keep the idler side smooth.
Source file for the track uploaded, along with a couple more pictures.
Burnt out one of the 35T brushed motors and have temporarily installed two SkyRC Cheetah brushless encoder motors (21.5T/1600kV) - still finding the motors too fast. For now put the 3x35mm bolts back in for connecting the track links together. Running it around outside (at half full throttle!) and motors stay cool. These motors seem good (but still too fast) but do not like the ESCs supplied with the motors.
Found some 80t 540 motors on ebay.ca - have ordered some to try out
http://www.ebay.ca/itm/GoolRC-540-80T-Brushed-Motor-for-1-10-Off-Road-Rock-Crawler-Climbing-RC-Car-Y5O9-/252834966558?hash=item3ade236c1e:g:tzgAAOSwSlBY21cn
80t motor with ESC:
http://www.ebay.ca/itm/GoolRC-540-80T-Brushed-Motor-with-40A-ESC-Combo-for-1-10-Axial-SCX10-RC-Car-D4G4-/252835041022?hash=item3ade248efe:g:ow8AAOSwc-tY22q1
Designed an aggressive tank tread. Only have enough links for one track so far - still printing. Shown on right side of tank. Left side is Bryant87's tank tread printed in PolyFlex. Everything else printed in PETG, including the aggressive tread links.
Tried something different on the aggressive tank tread - using 3mm ABS filament instead of the 3mmx35 bolts to hold the links together. Just used one 3mm bolt on the right track to make disassembly easier. Seems to work. Ream/clean the holes out with a 3mm drill bit. the fit on this track is very tight, so ream the center hole in the links out good.
Note: I just fried the 35t motor driving the aggressive track. Had the tank stuck nose down in a tough spot and could not turn the track.
Made a spacer for the motor to move it away from the drive sprocket 2mm. The drive gear on the motor was in touch with the drive sprocket.
My print of the stock track links were a bit sloppy fitting. Have printed some spacer/rings to go on the front idler to increase the diameter 4mm (IdlerRing-2mm-solid). Have also included IdlerRing-2.5mm-solid to increase the diameter by 5mm if required. These fit my idler pulley snug enough without any adhesive.
Suggest use 55t motors!
Print track links with support. I printed the track link with the tread side down (it will look ugly with the support) since more important to keep the idler side smooth.
Source file for the track uploaded, along with a couple more pictures.
Burnt out one of the 35T brushed motors and have temporarily installed two SkyRC Cheetah brushless encoder motors (21.5T/1600kV) - still finding the motors too fast. For now put the 3x35mm bolts back in for connecting the track links together. Running it around outside (at half full throttle!) and motors stay cool. These motors seem good (but still too fast) but do not like the ESCs supplied with the motors.
Found some 80t 540 motors on ebay.ca - have ordered some to try out
http://www.ebay.ca/itm/GoolRC-540-80T-Brushed-Motor-for-1-10-Off-Road-Rock-Crawler-Climbing-RC-Car-Y5O9-/252834966558?hash=item3ade236c1e:g:tzgAAOSwSlBY21cn
80t motor with ESC:
http://www.ebay.ca/itm/GoolRC-540-80T-Brushed-Motor-with-40A-ESC-Combo-for-1-10-Axial-SCX10-RC-Car-D4G4-/252835041022?hash=item3ade248efe:g:ow8AAOSwc-tY22q1
Similar models
thingiverse
free
M1 Gear for GoolRC 540 35T by RapApaR
...w speed)
if someone can test 3d printing polycarbonate .. it might be strong enough
let me know in comment if it's ok for you
3dwarehouse
free
Claw and Tank Robot
...exible filament for better grip. polycarbonate is recommended for the tank gear and connecting rods, and abs for the other parts.
thingiverse
free
Aggressive tracks for the RCtank by RobM64
...l have to print 96 of these and follow the instructions for stainds rc tank.
thanks to staind for making and sharing his rc tank!
thingiverse
free
Tank track Drive Sprocket V2 by TV3master
...he drive wheel for the tank tracks/ tread i have designed.
you can find those in my designs.
more info and pictures comming soon!
thingiverse
free
Sprocket for Pololu track/wheel by Al_batarr
...rse
drive and idler spockets for pololu 22t/30t tracks and pololu wheel 42x19mm :
wheel diameter : 35mm
shaft diameter : 3mm
grabcad
free
3d printed chassis
...s
grabcad
my model.
bearing 5х10х4mm
brushed 540 35t motor
mg995 servo
m3 screws
abs only!
https://www.patreon.com/buluicustom
3dwarehouse
free
Track Link Drive Sprocket
...track link drive sprocket
3dwarehouse
tetrix track link drive sprocket #ftc #pitsco #robotics #tetrix
thingiverse
free
Treads by LoialOtter
...ese were printed on tiny, my overly large 3d printer. details and updates on my printer can be found on https://ottersoft.ca/blog
thingiverse
free
TETRIX Tank Tread Sprocket Extended by FTC_8588
...xtended by ftc_8588
thingiverse
it's the standard tetrix tank tread sprocket but flat on one side and extended on the other.
thingiverse
free
TETRIX Tank Tread Sprockets by FTC_8588
...tetrix tank tread sprockets by ftc_8588
thingiverse
if you need some spare tetrix max tank tread sprockets then print them.
Evil
3d_export
$5
Evil yoda
...evil yoda
3dexport
evil yoda<br>stl
3d_export
$10
EVIL 3D Model
...evil 3d model
3dexport
evil dagger edge skull
evil 3d model evil 13163 3dexport
3d_export
$5
Evil Skeleton
...evil skeleton
3dexport
evil skeleton model rigged with texture map included working on maya
3d_export
$5
doofenshmirtz evil inc
...doofenshmirtz evil inc
3dexport
doofenshmirtz evil inc
3d_export
$5
Evil eye
...e-playing game of the forgotten realms and greyhawk universe; they were later transferred to a number of other fantasy universes.
turbosquid
$30
Evil knight
...urbosquid
royalty free 3d model evil knight for download as on turbosquid: 3d models for games, architecture, videos. (1595171)
turbosquid
$2
Evil Goblin
...urbosquid
royalty free 3d model evil goblin for download as on turbosquid: 3d models for games, architecture, videos. (1466495)
turbosquid
$4
Evil Candle
...y free 3d model evil candle for download as dds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1545230)
turbosquid
$3
Evil rabbit
...y free 3d model evil rabbit for download as c4d, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1704687)
3d_ocean
$8
Evil Brain
...gue
this is a 3d model (low poly) “evil brain”. triangles: 1188. diffuse texture (hand painted): 1024×1024.tga. formats: mb, obj.
Rc
3ddd
$1
RC Helicopter
...rc helicopter
3ddd
вертолет
mini rc helicopter
93.329 polys
3d_export
$7
rc helicopter model
...rc helicopter model
3dexport
rc helicopter model
3d_ocean
$25
RC F1
...rc f1
3docean
auto car control f1 formula race rc remote speed
remote control f1 car
turbosquid
$10
rc plane
...lane
turbosquid
free 3d model rc plane for download as blend on turbosquid: 3d models for games, architecture, videos. (1295828)
turbosquid
$100
RC Helicopter
...free 3d model rc helicopter for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1298511)
turbosquid
$59
Drone with RC
...3d model drone with rc for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1363601)
turbosquid
$75
RC buggy
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
RC Plane001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
RC Jet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Rc airplane
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mods
design_connected
$13
MOD. 4233 - MOD. 4234 Table Lamp
...mod. 4233 - mod. 4234 table lamp
designconnected
arcahorn mod. 4233 - mod. 4234 table lamp computer generated 3d model.
design_connected
$11
MOD.1095
...mod.1095
designconnected
mod.1095 computer generated 3d model. designed by sarfatti, gino.
3ddd
$1
fireplaces mod Spec
...fireplaces mod spec
3ddd
камин
fireplaces mod spec 180x90x125h
3ddd
free
Flos Mod. 2129
... mod
фабрика: flos
модель: mod. 2129
описание: подвесной светильник, металл, белый, черный.
сайт: www.flos.com
turbosquid
$34
Mod Lamp.c4d
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$32
MOD A 001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Maars Mod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Mod 70..
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
MOD Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Mod-Lite
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
K
turbosquid
$1
Swedish-K / K-Pist
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
K lamp
...k lamp
3ddd
k lamp
3ddd
free
Giano K
...giano k
3ddd
стеллаж
книжные полки giano k
3ddd
$1
K-table
...k-table
3ddd
henge furniture , письменный
k-table by henge furnitures
design_connected
$13
Thin-K
...thin-k
designconnected
kristalia thin-k computer generated 3d model. designed by bertoncini, luciano.
design_connected
$9
Miss K
...miss k
designconnected
flos miss k table lights computer generated 3d model. designed by philippe cramer.
3ddd
$1
Papatya / Ego-K
...papatya / ego-k
3ddd
papatya
papatya / ego-k
3ddd
$1
DeMajo 2612/K
...demajo 2612/k
3ddd
demajo
люстра demajo 2612/k
turbosquid
$14
Fence K
...turbosquid
royalty free 3d model fence k for download as fbx on turbosquid: 3d models for games, architecture, videos. (1314643)
turbosquid
$7
K for Key
...rbosquid
royalty free 3d model k for key for download as max on turbosquid: 3d models for games, architecture, videos. (1689776)
Tank
archibase_planet
free
Tank
...ibase planet
tank tank-wagon tank-truck tank-car
tank train small n110113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_ocean
$49
Tank
...tank
3docean
kv-1s tank
tank kv-1s
archibase_planet
free
Tank
...tank
archibase planet
tank medium tank
tank wmcvun n070712 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Tank
...k
archibase planet
tank light tank bt-2 high-speed tank
tank bt-2 n200814 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
tanks
...tanks
3dexport
tanks
3d_export
free
tank
...tank
3dexport
tank
archibase_planet
free
Tank
...tank
archibase planet
tank heavy tank
tank abrams l n090511 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Tank
...tank
archibase planet
tank medium tank
tank m60 n070712 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Tank
...tank
archibase planet
tank medium tank
tank female n070712 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
3d_export
$5
tank
...tank
3dexport
tank lowpoly
Speed
turbosquid
$50
speed
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
speed
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
speed
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$8
Speed Camera
...model is separate and named appropriately. this is perfect for any type of scene from a road side, architectural or motorway s...
turbosquid
$25
Speed Buggy
...urbosquid
royalty free 3d model speed buggy for download as on turbosquid: 3d models for games, architecture, videos. (1209512)
turbosquid
$4
Speed Sign
...turbosquid
royalty free 3d model speed sign for download as on turbosquid: 3d models for games, architecture, videos. (1251518)
3d_export
$10
variable speed bicycle
...variable speed bicycle
3dexport
variable speed bicycle
3d_export
$5
High - speed aircraft
...high - speed aircraft
3dexport
high speed plane
turbosquid
$185
Speed Boat
... free 3d model speed boat for download as skp, blend, and obj on turbosquid: 3d models for games, architecture, videos. (1606216)
turbosquid
$5
Speed bag
...y free 3d model speed bag for download as blend, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1577878)