Thingiverse
RC Lancia Delta S4
by Thingiverse
Last crawled date: 5 years, 5 months ago
This model has 1/10 scale and based on 1/18 chassis from Wltoys buggy. I have used Wltoys K929B, but there is possible to use WLtoys A959B or cheaper Wltoys A959, also I have MZ GS1004 buggy which very similar with Wltoys.
Original chassis cutted in the middle and extended by 8 cm, need to drill some 3 mm holes and insert screws M3. Also need to cut central driveshaft, I fixed extend shaft by superglue and it works fine.
Shock's mounts was changed to horizontal bar for increasing ground clearance. Because the new body has more weight, I have added preload spacers on front shocks.
Body mounted on the chassis by improvised soldered frame from copper wire.
https://www.youtube.com/watch?v=R2s3aSYsLCghttps://www.youtube.com/watch?v=1YR_IJ8EXOw
Original chassis cutted in the middle and extended by 8 cm, need to drill some 3 mm holes and insert screws M3. Also need to cut central driveshaft, I fixed extend shaft by superglue and it works fine.
Shock's mounts was changed to horizontal bar for increasing ground clearance. Because the new body has more weight, I have added preload spacers on front shocks.
Body mounted on the chassis by improvised soldered frame from copper wire.
https://www.youtube.com/watch?v=R2s3aSYsLCghttps://www.youtube.com/watch?v=1YR_IJ8EXOw