Thingiverse
RC hatch hinge by tfrancis
by Thingiverse
Last crawled date: 4 years, 7 months ago
Hatch hinges for RC planes.
These use a piece of 1.75mm filament for the hinge pin, the holes may need to be cleaned / drilled out for a proper fit & movement.
These will print best at 100% infill, with a .25mm tip with PLA, ABS or ASA.
I have included my original 123D Design files for use if modifications are needed, these do scale if required.
These use a piece of 1.75mm filament for the hinge pin, the holes may need to be cleaned / drilled out for a proper fit & movement.
These will print best at 100% infill, with a .25mm tip with PLA, ABS or ASA.
I have included my original 123D Design files for use if modifications are needed, these do scale if required.