Thingiverse
Razor Sharpening Guide
by Thingiverse
Last crawled date: 6 years, 6 months ago
Just a quick make of a sharpening jig for a 1.5" single edge razor blade. Insert sideways into jig.
One side is a 10 degree angle with 2mm offset. Other side is about 30 degrees when angled.
I use the 10 degree angle for the large bevel and the 30 degree for finer grit honing.
One side is a 10 degree angle with 2mm offset. Other side is about 30 degrees when angled.
I use the 10 degree angle for the large bevel and the 30 degree for finer grit honing.