Thingiverse
Razor Guillotine by Botmaster
by Thingiverse
Last crawled date: 3 years ago
I needed a way of cutting heat shrink tube into repeatable short lengths. It also needed to be safe and not have any exposed blades. the hole is 6mm sq, the largest I could make it without somebody getting their finger in it.
It is all 3D printable, The only extras are the guide rods these are K&S stock #508 5/32 music wire that can be purchased at any model shop. A single edge razor blade and 2 light weight springs.
WARNING Be very careful inserting the razor blade into the holder.
As I have no control over your usage you accept full responsibility for building and using this tool.
I had a request for a 50 mm cut capacity, I have added the STL for this. I have not printed it but it should be fine, please let me know if you have any issues with this.
Updated 50mm base file due to rod hole being oversize
It is all 3D printable, The only extras are the guide rods these are K&S stock #508 5/32 music wire that can be purchased at any model shop. A single edge razor blade and 2 light weight springs.
WARNING Be very careful inserting the razor blade into the holder.
As I have no control over your usage you accept full responsibility for building and using this tool.
I had a request for a 50 mm cut capacity, I have added the STL for this. I have not printed it but it should be fine, please let me know if you have any issues with this.
Updated 50mm base file due to rod hole being oversize
Similar models
thingiverse
free
Razor holder for Aldi razor blades by
...dn't get a new razor holder, but had some blades left. you have to cut the littel arc under the blades to fit in this holder.
thingiverse
free
another one bottle cutter by glloq
...ter by glloq
thingiverse
it's another one bottle cutter
you'll need a 35x11mm blade (i've cut a razor blade in half)
thingiverse
free
Small Razor Blade Box by ahrendsen
... problem of razors falling over when it's empty by making a few dividers that are smaller than the height of the razor blades
thingiverse
free
Wire Stripper / Splitter for harvesting copper
...a safety blade in the slot, but you could probably use any razor blade or box cutter. if you have a better design, please share!
thingiverse
free
Single Edge Razor Blade Shaving Razor by Atomist
...e out in about 30 mins in sketchup.
note: if you do decide to shave with this make sure you use clean high quality razors blades.
thingiverse
free
Razor Planer for Balsa Wood by tauscnc
...for my rc airplane build (downloaded one which looks similar but wanted fine adjustments on the blade like the...
thingiverse
free
Adjustable safety razor and brush stand by Secondrobotics
...rent lengths depending on you brush/razor. its a simplistic design that uses very little material. use either pla or abs.
enjoy!
thingiverse
free
Safety Razor Blade Tray
...safety razor blade tray
thingiverse
a rack that will help you to organise all the safety razor blades you have.
thingiverse
free
Dollar Shave Club razor and blade pack holder by KajnKreator
...more searching.
this was designed for the dollar shave club razor pack and razor. other brands may fit, though i have not tried.
thingiverse
free
Garage Door Seal Trimmer by macjville
... the razor blades are very sharp and due to differences in 3d printers, the razor blades could slide out while using the trimmer.
Botmaster
thingiverse
free
Remix of Classic Rocket By Botmaster by Ilslaoaycd
...ing:580192 .
if the tolerance is too tight you will need to sand it down. i made it for smaller printers to make a taller rocket.
thingiverse
free
Razor Guillotine by Botmaster (fence modified)
...hat prevents it to be used to cut very short pieces.
my lock has the screw vertically placed and is a little longer and sturdier.
thingiverse
free
Egg Cup Rocket by Botmaster
...r
thingiverse
this is a remix of http://www.thingiverse.com/thing:26524. wanted 4 fins and a bit more like the v2 rocket of ww2.
thingiverse
free
Syringe Holder 10ml by Botmaster
...y botmaster
thingiverse
i made this to keep syringes from rolling around on the work bench. i hope someone else finds it useful.
thingiverse
free
Feather Quill by Botmaster
...it's feathers then you can always just print a feather. now all you need is some ink and a really important document to sign.
thingiverse
free
Alphabet Necklace by Botmaster
...s to help them spin.
the one in the photo was printed with colorfabb bronze filament, the letters were fill with paint in after.
thingiverse
free
Allan Key Knob by Botmaster
... small set of allan keys used on the makerbot. if you would like any other sizes let me know and i will put them up here for you.
thingiverse
free
Rocket Verns Style by Botmaster
...is in vase mode, not all slicers will do this so i have also uploaded the x3g makerbot file for any one wanting to use this mode.
thingiverse
free
Classic Rocket by Botmaster
...s and the model does not hold together then too cool too fast or under extruding.
now go build you inter ballistic strike force
thingiverse
free
Test Wall by Botmaster
...t a solid wall. as you can see from the 2 photos by reducing the number of shells more of the walls close up. hope this help you.
Guillotine
turbosquid
$29
Guillotine
...turbosquid
royalty free 3d model guillotine for download as on turbosquid: 3d models for games, architecture, videos. (1560590)
turbosquid
$25
Guillotine
...d
free 3d model guillotine for download as obj, stl, and fbx on turbosquid: 3d models for games, architecture, videos. (1522021)
turbosquid
$12
Guillotine
...
royalty free 3d model guillotine for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1252389)
3d_export
$10
The guillotine and the block
...the guillotine and the block
3dexport
the guillotine and the block autocad 2013
3d_export
free
the guillotine
...the guillotine
3dexport
3d_export
$5
guillotine
...ch guillotine. it look used (have dry blood on it, but i can change it if needed). every file have a zip folder in with textures.
3d_export
$20
guillotine
...guillotine
3dexport
a historic execution device
turbosquid
$55
Guillotine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Guillotine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Guillotine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Razor
turbosquid
$10
Razor
...squid
royalty free 3d model razor for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1704637)
turbosquid
$29
razor
...ty free 3d model razor for download as c4d, fbx, 3ds, and obj on turbosquid: 3d models for games, architecture, videos. (1667377)
turbosquid
$75
Razors
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Razor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Razor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Razor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
razor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Straight Razor
...uid
royalty free 3d model straight razor for download as ztl on turbosquid: 3d models for games, architecture, videos. (1287737)
turbosquid
$35
Safety Razor
... free 3d model safety razor for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1298467)
turbosquid
$9
Straight Razor
...d model straight razor for download as fbx, dae, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1609423)