Thingiverse
![razor blade holder (remix) by CatoNatta](/previews/8964606.jpg)
razor blade holder (remix) by CatoNatta
by Thingiverse
Last crawled date: 3 years, 1 month ago
Trapezoidal razor blade holder. Based on a design by paradiddle65 [ http://www.thingiverse.com/thing:36722 ]. The original design was well done, but had two small shortcomings. It was held together by a single large screw in the middle of the holder that allowed the ends to separate slightly. The tolerances used for the locking channels were too loose.
The following changes were made to the original design. Two small M3x16mm replaced the single large center screw. The locking channels were lengthened and held to tighter tolerances. The material reduction area was replaced with an internal blade storage compartment. The compartment can store up to five extra blades and still reduces the amount of filament required to print the holder. The holder was also widened to 15mm. This was done to accommodate the M3x16mm screws that were readily available.
NOTE: The locking channel tolerances are a little tighter than expected. A couple of light strokes with a small file on the edges will aided the initial assembly. With use, this issue resolves itself.
U P D A T E D : Version 2
Relaxed locking channel tolerances
Added 1.5mm radius to handle edge
Added small "separation" notch
U P D A T E D : Experimental Screwless Version
Original locking channel tolerances (friction fit)
Has discs to show "safe" screw locations
Retains all other Version 2 features
NOTE: I have NOT printed this. It should work based on my experiences with the other versions. If the friction fit should prove insufficient, the discs indicate locations "safe" to retro fit with screws. If feedback is provided, the version will be corrected.
The following changes were made to the original design. Two small M3x16mm replaced the single large center screw. The locking channels were lengthened and held to tighter tolerances. The material reduction area was replaced with an internal blade storage compartment. The compartment can store up to five extra blades and still reduces the amount of filament required to print the holder. The holder was also widened to 15mm. This was done to accommodate the M3x16mm screws that were readily available.
NOTE: The locking channel tolerances are a little tighter than expected. A couple of light strokes with a small file on the edges will aided the initial assembly. With use, this issue resolves itself.
U P D A T E D : Version 2
Relaxed locking channel tolerances
Added 1.5mm radius to handle edge
Added small "separation" notch
U P D A T E D : Experimental Screwless Version
Original locking channel tolerances (friction fit)
Has discs to show "safe" screw locations
Retains all other Version 2 features
NOTE: I have NOT printed this. It should work based on my experiences with the other versions. If the friction fit should prove insufficient, the discs indicate locations "safe" to retro fit with screws. If feedback is provided, the version will be corrected.
Similar models
thingiverse
free
![OLFA Blade Holder Replacement by AnansiTheArmadillidiidae](/t/8656157.jpg)
OLFA Blade Holder Replacement by AnansiTheArmadillidiidae
...ife (l-1). i broke the original after 8 years of constant abuse. i reused the friction fit threaded insert and the original knob.
thingiverse
free
![Gillette MACH 3 razor blade holder by Domonoky](/t/9065353.jpg)
Gillette MACH 3 razor blade holder by Domonoky
... as the original, it just has a tight fit to the blades. but it works :-)
you can read more about it at: http://www.ifeelbeta.de
thingiverse
free
![razor blade scraper with cover by jsc](/t/8996999.jpg)
razor blade scraper with cover by jsc
...ades lying around.
there is a new version with blade locking available.
or try my latest model with superior blade retention.
thingiverse
free
![FLAK- U channel replacement for rocket only by Corsairs](/t/8180451.jpg)
FLAK- U channel replacement for rocket only by Corsairs
...ews at 10mm long.
i had to do a lot of filing on this to get them to fit. a improved version will come when my parts kit gets in!
thingiverse
free
![razor wall hanger with blade storage by cr4wb4r](/t/8556926.jpg)
razor wall hanger with blade storage by cr4wb4r
...holder, has a high edge around the frontside to keep the blades from falling of.
i tested the holder with gillette mach 3 razors.
thingiverse
free
![Razor holder for Aldi razor blades by](/t/8583274.jpg)
Razor holder for Aldi razor blades by
...dn't get a new razor holder, but had some blades left. you have to cut the littel arc under the blades to fit in this holder.
thingiverse
free
![Razor Holder Dollar Shave Club (DSC) by fruitkillr](/t/8294119.jpg)
Razor Holder Dollar Shave Club (DSC) by fruitkillr
...al holder with wider slot to fit dsc razor
razor_holder_wide_19mm.stl = what you see in the pictures. wider slot and shorter arms
thingiverse
free
![Razor blade holder, Parts-box safe by JD_Printing](/t/8783890.jpg)
Razor blade holder, Parts-box safe by JD_Printing
... the bottom of the bin and turning sharp point up. (of course, what other way would it land).
works great! keeps the blade handy.
thingiverse
free
![Arduino Micro Holder by zcsaale](/t/9008493.jpg)
Arduino Micro Holder by zcsaale
...
thingiverse
small holder for an arduino micro without headers. no screws, completely held in by friction. designed in sketchup.
thingiverse
free
![Razor Blade Holder 2.0 by saulquinn](/t/9677123.jpg)
Razor Blade Holder 2.0 by saulquinn
...lly matter.
this model was designed in onshape and was built as a better version of my original, which was designed in tinkercad.
Razor
3ddd
$1
![Кальян CWP-Razor-01](/t/956616.jpg)
Кальян CWP-Razor-01
...кальян cwp-razor-01
3ddd
кальян
шахты для кальяна starbuzz
3d_ocean
$50
![Razor RZX-1000](/t/568475.jpg)
Razor RZX-1000
...y race racer racing razor ready rzx rzx-1000 rzx1000 super superbike tri tri-bike tribike vehicle
high quality generic superbike.
3d_ocean
$18
![Acca Kappa shaving set](/t/566967.jpg)
Acca Kappa shaving set
...3docean accessory bath brush cream foam gel interior men razor room set shave shaving soap spray high quality 3d...
3d_ocean
$12
![shaver](/t/581988.jpg)
shaver
...barber equipment beauty salon comb hair curlers hairdresser kit razor shaver spray subdivision models.in archive there are 3ds max...
3d_ocean
$25
![Barbershop set](/t/585047.jpg)
Barbershop set
...7 types of combs, shaver, 2 types of scissors, razor sprayer and...
3d_ocean
$2
![Razor Wire](/t/591575.jpg)
Razor Wire
...w polygonal model, made from planes with opacity maps. - poly count: 72 - formats: max /obj /fbx/3ds/dxf - high detail was pre...
cg_studio
$22
![Requiem Great Sword3d model](/t/790639.jpg)
Requiem Great Sword3d model
...great sword siegfried medieval medi evil sharp knife cut razor blade battle ready gameready game anime .max - requiem...
3d_export
$45
![Safety Razor 3D Model](/t/855846.jpg)
Safety Razor 3D Model
...glide mach bathroom restroom
safety razor 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl plutonius 109006 3dexport
cg_studio
$18
![Dragor Shield3d model](/t/828123.jpg)
Dragor Shield3d model
...dragor shield sword medievil medi evil sharp knife cut razor blade battle ready gameready game fight fighter fighting king...
cg_studio
$20
![Barbarian Hammer3d model](/t/828280.jpg)
Barbarian Hammer3d model
...barbarian hammer sword medieval medi evil sharp knife cut razor blade battle ready gameready game fight fighter .max -...
Blade
3d_export
$20
![Fantasy Weapons Package 3D Model](/t/297047.jpg)
Fantasy Weapons Package 3D Model
...pack medieval rpg mmorpg sword dagger axe bow ax blade projectile archery low poly game ready set collection fantasy...
3d_export
free
![Download free KA BAR USMC combat knife black 3D Model](/t/297487.jpg)
Download free KA BAR USMC combat knife black 3D Model
...combat knife black 3d model 3dexport combat hunting knife blade weapon tactical military gun modern war human accessory ka...
3d_export
$5
![Ceiling fan 3D Model](/t/292582.jpg)
Ceiling fan 3D Model
...room fan extractor extract interior 3d model light bulb blade rotor lamp ceiling fan 3d model mimicmwb 24939...
3d_ocean
$9
![Folding Pocket Knife](/t/861777.jpg)
Folding Pocket Knife
...folding pocket knife 3docean army blade combat dagger ergonomic fight folding game high knife melee...
3d_export
$8
![Warhammer Power Sword 3D Model](/t/859798.jpg)
Warhammer Power Sword 3D Model
...model 3dexport sword power powersword hammer war weapon cut blade knife cutting slash slice melee fantasy warhammer power sword...
3d_export
$12
![Dagger Arkansas Toothpick 3D Model](/t/860044.jpg)
Dagger Arkansas Toothpick 3D Model
...war army tool steel weapon melee lowpoly gamedev game blade commando sword spear dagger arkansas toothpick 3d model download...
cg_studio
$5
![Sword 053d model](/t/959331.jpg)
Sword 053d model
...exotic blunt cutting fantasy blade cartoon handpainted orc knight blade .max .obj .fbx .dae .3ds - sword 05 3d...
cg_studio
$5
![Sword 043d model](/t/959338.jpg)
Sword 043d model
...exotic blunt cutting fantasy blade cartoon handpainted orc knight blade .max .obj .fbx .dae .3ds - sword 04 3d...
cg_studio
$5
![Sword 143d model](/t/959342.jpg)
Sword 143d model
...exotic blunt cutting fantasy blade cartoon handpainted orc knight blade .max .obj .fbx .dae .3ds - sword 14 3d...
cg_studio
$5
![Sword 093d model](/t/959343.jpg)
Sword 093d model
...exotic blunt cutting fantasy blade cartoon handpainted orc knight blade .max .obj .fbx .dae .3ds - sword 09 3d...
Remix
3ddd
$1
![Barovier&Toso / Manhattan Remix 7192](/t/975533.jpg)
Barovier&Toso / Manhattan Remix 7192
... 004293-142405
в коллекции есть люстры 7, 9, 12 рожковые. диаметр соответственный 1000, 1250, 1500 мм.
3d_ocean
$5
![Vray fabric Kvadrat remix green - tileable](/t/557921.jpg)
Vray fabric Kvadrat remix green - tileable
...th vray and 3dsmax. high-resolution texture images (2000×2000 px) file included: shader vray 2.40 texture image 3ds max 2011 file
3ddd
$1
![Muuto fiber chair](/t/378795.jpg)
Muuto fiber chair
...grey/grey, dusty green/dusty green, nature/oak, natural white/oak upholstery options remix 183/black, remix 133/grey, remix 643/dusty red leather options black...
cg_studio
$49
![HTC One Mini 2 Gunmetal Gray3d model](/t/869172.jpg)
HTC One Mini 2 Gunmetal Gray3d model
...cell phone mobile cellular super lcd touchscreen touch screen remix gunmetal grey silver .max .obj .mb .lwo .fbx .c4d...
cg_studio
$49
![HTC One Mini 2 Glacial Silver3d model](/t/868106.jpg)
HTC One Mini 2 Glacial Silver3d model
...cell phone mobile cellular super lcd touchscreen touch screen remix glacial silver gray .max .obj .mb .lwo .fbx .c4d...
cg_studio
$49
![HTC One Mini 2 Amber Gold3d model](/t/922651.jpg)
HTC One Mini 2 Amber Gold3d model
...cell phone mobile cellular super lcd touchscreen touch screen remix amber gold .max .obj .mb .lwo .fbx .c4d .3ds...
3ddd
$1
![Barovier&Toso 7190-7195](/t/719055.jpg)
Barovier&Toso 7190-7195
...7190-7195 3ddd barovier&toso потолочнай люстра фабрики barovier&toso;, коллекция manhattan remix артикул 7190-7195. размеры в inches: 39"...
3d_export
$5
![3D Locking Handle Weatherproof Storage Box Container](/t/11369941.jpg)
3D Locking Handle Weatherproof Storage Box Container
...handle weatherproof storage box container 3dexport new, improved and remixd! no screws required. print-in-place. weatherproof. parametric. 2 parts. easy...
3d_export
$10
![multicolored remix parametric table furniture](/t/11416423.jpg)
multicolored remix parametric table furniture
... fbx, obj, mtl, archive with textures. the model has no glitches. render and materials - vray . without using plugins. good use!
3d_export
$12
![remix yamaha rm1x](/t/11490265.jpg)
remix yamaha rm1x
...remix yamaha rm1x
3dexport
geometry triangles 15.2k vertices 7.6k pbr no textures 1 materials 1 uv layers yes
Holder
3d_export
$8
![Cup Holder 3D Model](/t/283499.jpg)
Cup Holder 3D Model
...cup holder 3d model
3dexport
cup holder kitchen utility's
cup holder 3d model kingnin27 70463 3dexport
3d_export
$30
![Office Set 10 3D Model](/t/296359.jpg)
Office Set 10 3D Model
...furniture closets middle tower display keyboard books folders paper holder clock lamp pen office set 10 3d model humster3d...
3d_export
$20
![Bath accessories Newform Base 3D Model](/t/296404.jpg)
Bath accessories Newform Base 3D Model
...model 3dexport accessory bath toilet room interior soap lotion holder brush dish tissue design home liquid paper roll fixture...
3ddd
$1
![IKEA SODERHAMN](/t/864016.jpg)
IKEA SODERHAMN
...wadding: polyester hollow fibre wadding, non-woven polypropylene bed slat holder polypropylene plastic bed slats: beech- or birch veneer, beech...
3ddd
$1
![Crate&Barrel Haunted House](/t/864041.jpg)
Crate&Barrel Haunted House
...находятся модели: raven string lights london glass hurricane candle holder carved wood ravens black branch artificial wreath 296 509...
3ddd
$1
![White Candle Holder Set](/t/865795.jpg)
White Candle Holder Set
...white candle holder set
3ddd
подсвечник
белые керамические подсвечники
3ddd
$1
![Alessi BLIP Utensil and Spoon Rest Holder](/t/866316.jpg)
Alessi BLIP Utensil and Spoon Rest Holder
... держатель , ложка
держатель и ложка от фирмы alessi
размеры - 15 х 9 х 3,5 см
3d_export
$10
![Document Tray 3D Model](/t/859400.jpg)
Document Tray 3D Model
...3d model 3dexport document tray office stationery desk accessories holder work organizer organisation filing in out kiv processing storage...
3d_export
$7
![Suspended Candlestick Holder 3D Model](/t/859617.jpg)
Suspended Candlestick Holder 3D Model
... general decor
suspended candlestick holder 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl quartor 103576 3dexport
3d_export
$11
![Cogwheel pencil holder 3D Model](/t/859750.jpg)
Cogwheel pencil holder 3D Model
... accessories house
cogwheel pencil holder 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl cayman307 108406 3dexport