Razor Blade Case for Safe Storage and Air Drying

Last crawled date: 4 years, 2 months ago

I designed this little case to store used blade after shaving. It is recommended to air dry your blade, outside your razor to help keep the blade sharp and avoid razor rusting. With a toddler around the house, air drying the blade in open was not an option: hence this case!
The case is designed with following considerations:
1) Optimally sized studs to hold the blade without too much play, but still easy to load the blade
2) Larger width to ensure safety from blade edge, while holding the case
3) Just enough length with curved slots on sides for ease of inserting the blade and taking it out
4) Curved bottom and top to ensure minimal contact with the blade to allow max efficiency in air drying
5) Slots at top and bottom for good air flow
6) Lid that nicely snaps in place, protecting the blade, but not too difficult to open.
Please print at 0.12 resolution to ensure tolerances are within limits or the lid won't snap in place.