Thingiverse
Rattlesnake Rattle (rotated 70991) by jtrantow
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a modification of thing "Rattlesnake Rattle" by trishabelly thing 70991. I had a bunch of problems printing the original because some of the parts were floating above the bed.
Split is the original cut in half and the two parts will need to be glued together.
RotY is the original with a slight rotation about Y axis to get more of the rattles on the bed. This helps with sections lifting off the table during the print.
RotYRotX is RotY with the last two or three sections rotated about the X axis to avoid the tail floating above the table.
I recommend printing the RotYRotX file.
Split is the original cut in half and the two parts will need to be glued together.
RotY is the original with a slight rotation about Y axis to get more of the rattles on the bed. This helps with sections lifting off the table during the print.
RotYRotX is RotY with the last two or three sections rotated about the X axis to avoid the tail floating above the table.
I recommend printing the RotYRotX file.