Thingiverse
Ratcheting Socket Wrench by Thyer
by Thingiverse
Last crawled date: 4 years, 10 months ago
A simple double sided, single direction ratcheting wrench for both simplicity of print and also minimizing moving parts to improve strength and increase the amount of torque output.
-\PARTS//-
3x M3x25 Bolts
3x M3 Nuts
3/8" sockets
NOTE - The spring part is purposely made slightly longer than is required to allow the maker to use flush cutters to trim to allow them to tune the feel and strength of the ratchet.
Grease is not required but I did add some food safe grease and it did make the mechanism smoother and quieter.
-\PARTS//-
3x M3x25 Bolts
3x M3 Nuts
3/8" sockets
NOTE - The spring part is purposely made slightly longer than is required to allow the maker to use flush cutters to trim to allow them to tune the feel and strength of the ratchet.
Grease is not required but I did add some food safe grease and it did make the mechanism smoother and quieter.