Cults
Rat
by Cults
Last crawled date: 6 years, 2 months ago
Rat from the comic strip "Pearls Before Swine" by Stephan Pastis.
Rat is an insensitive character in the strip, whose interactions with others are typically sarcastic, condescending, self-centered, insulting and sometimes violent.
No supports are required. If you have the right filament colors, no painting is needed.
The completed model is 130mm tall after assembly. This model is in proportion to the Pig and Crocodile models from the comic that I've also posted.
Enjoy!
-------------------------
Print Settings
Printer:
FlashForge Creator X
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
See below for helpful printing and assembly tips.
Building the model
Colors (there are no multiple printed pieces)
Black:
eye_left
eye_right
arm_left
arm_right
tail
nose
legs
..
Grey:
body_back
body_front
..
Yellow:
base (optional)
..
Any color (hidden piece)
body_bumps
Printing and assembly tips
Printing Tips:
1-No supports are required.
..
2-I used a brim on a few pieces, use your discretion based on your own preference:
-tail is a tall curved piece with a very small base
-nose has a very small base with a much larger body
..
3-The eyes pieces might be interchangeable. I did not model them as perfect mirrors so they are posted as separate pieces.
..
4- For the best looking model be sure to clean your brims thoroughly. All the pieces are sized to fit nicely, providing the brims/squish are cleaned up. This includes the holes for the body_bumps.
..
5-I had a difficult time getting the arms modeled so that everything prints without supports. Therefore the fit of the arms to the body are quite tight and a bit of cleanup may be required.
..
Assembly tips:
-The diagram in the pictures section will help in assembling the model and is quite straightforward.
-The model is meant to be glued together.
-Again, take care to ensure that the first layer 'squish' and any added brim is completely cleaned off.
-The nose to body connection is fairly small and completely flat without any indents for alignment. I use E6000 glue for my models. The glue gets tacky quickly, but then allows for a two hour drying time. I had no issue gluing these parts even though at first glance it seems awkward.
-The model stands nicely on it's own, however a base is included for extra stability if needed.
Rat is an insensitive character in the strip, whose interactions with others are typically sarcastic, condescending, self-centered, insulting and sometimes violent.
No supports are required. If you have the right filament colors, no painting is needed.
The completed model is 130mm tall after assembly. This model is in proportion to the Pig and Crocodile models from the comic that I've also posted.
Enjoy!
-------------------------
Print Settings
Printer:
FlashForge Creator X
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
10%
Notes:
See below for helpful printing and assembly tips.
Building the model
Colors (there are no multiple printed pieces)
Black:
eye_left
eye_right
arm_left
arm_right
tail
nose
legs
..
Grey:
body_back
body_front
..
Yellow:
base (optional)
..
Any color (hidden piece)
body_bumps
Printing and assembly tips
Printing Tips:
1-No supports are required.
..
2-I used a brim on a few pieces, use your discretion based on your own preference:
-tail is a tall curved piece with a very small base
-nose has a very small base with a much larger body
..
3-The eyes pieces might be interchangeable. I did not model them as perfect mirrors so they are posted as separate pieces.
..
4- For the best looking model be sure to clean your brims thoroughly. All the pieces are sized to fit nicely, providing the brims/squish are cleaned up. This includes the holes for the body_bumps.
..
5-I had a difficult time getting the arms modeled so that everything prints without supports. Therefore the fit of the arms to the body are quite tight and a bit of cleanup may be required.
..
Assembly tips:
-The diagram in the pictures section will help in assembling the model and is quite straightforward.
-The model is meant to be glued together.
-Again, take care to ensure that the first layer 'squish' and any added brim is completely cleaned off.
-The nose to body connection is fairly small and completely flat without any indents for alignment. I use E6000 glue for my models. The glue gets tacky quickly, but then allows for a two hour drying time. I had no issue gluing these parts even though at first glance it seems awkward.
-The model stands nicely on it's own, however a base is included for extra stability if needed.
Similar models
cults
free
Pig
...re no left/right differences.
-the model stands nicely on it's own, however a base is included for extra stability if needed.
cults
free
Crocodile
...re no left/right differences.
-the model stands nicely on it's own, however a base is included for extra stability if needed.
cults
free
Dogbert
...nto the notch on the body above the nose and glued them into the glasses_arms. it all turned out quite simple to glue into place.
cults
free
Alice
... easy to get the left/right legs and shoes mixed up. sorry, but the pieces are small and there was not much room for distinction.
cults
free
Wally
...y previous models, you know who you are!). all parts should fit nicely and the only cleanup should be on the first layer, if any.
thingiverse
free
Rat by reddadsteve
...all after assembly. this model is in proportion to the pig and crocodile models from the comic that i've also posted.
enjoy!
cults
free
Dilbert
...eces together to create the full tie separately. i suggest attaching the completed tie to the rest of the model as the last step.
cults
free
Snoopy
...itioning of the text characters.
3-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Charlie Brown
...hand were it touches the stripe.
5-refer to the assembly diagram for putting the model together. the model is meant to be glued.
cults
free
Pointy Haired Boss
...eces together to create the full tie separately. i suggest attaching the completed tie to the rest of the model as the last step.
Rat
3d_export
$5
rat
...rat
3dexport
high-poly rat
turbosquid
$12
Rat
... grey rats voles subterranean creatures for download as max on turbosquid: 3d models for games, architecture, videos. (1575903)
3d_export
$5
rat
...rat
3dexport
cartoon rat, with pink ears, textures, everything is enabled.
3d_ocean
$15
Rat
...er dirt funny game mouse rat rodent
3d model of rat or rodent, base on mesh available uvmap with texture, only 1270 total polygon
turbosquid
$55
rat
...rat
turbosquid
royalty free 3d model rat for download as ma on turbosquid: 3d models for games, architecture, videos. (1437254)
turbosquid
$50
rat
...rat
turbosquid
royalty free 3d model rat for download as ma on turbosquid: 3d models for games, architecture, videos. (1529835)
turbosquid
$2
Rat
...t
turbosquid
royalty free 3d model rat for download as blend on turbosquid: 3d models for games, architecture, videos. (1625430)
turbosquid
$25
Rat
...osquid
royalty free 3d model furry rat for download as blend on turbosquid: 3d models for games, architecture, videos. (1147091)
turbosquid
$50
rat
...d
royalty free 3d model rat for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1314288)
turbosquid
$50
rat
...d
royalty free 3d model rat for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1314287)