Rat Corner Platform and Ladder by cogsy

Last crawled date: 3 years ago

A sturdy platform for the corner of the cage for our rodent buddies to climb on. The ladder slides in to the top of the platform and sits flush with the surface, while being securely retained with no glue.
I originally had screw holes in the tabs and another outer piece that screwed on to hold the platform in place, but it fits through the bars so securely that it doesn't need it.
This design is for 15mm gap between the bars. Scale it as necessary to fit your cage sizing. If needed, I have the bottom platform as well, which is the same except without the cutout for the ladder.