Thingiverse
Raspi FLIRC case hanger
by Thingiverse
Last crawled date: 4 years, 2 months ago
I wanted a way to get my Raspberry Pi (running RetroPie) mounted inside my Arcase1Up cabinet, but I needed easy access to all three sides for cables and the memory card. Once permanently mounted, this access is more difficult.
I have my Pi in a FLIRC aluminum case so I made a mount that fit that case, and decided the best thing for my purpose was to "hang" mount it so that it was secure, but easily removable.
Here's what I came up with. It works very well. I can easily lift my Pi (in its case) out of the hanger and change the memory card or the USB cables, then drop it back into the hanger. And it lets the aluminum FLIRC case do it's heat-sink duty without adding another full wrapper.
This was made to accommodate the FLIRC case, but should work with any form-fitting case.
I have two versions - one for screw mounting and one for double-sided-sticky-tape mounting (which I used for attaching the hanger to my A1Up cab.)
The back plate is not very thick (2.5mm) and there's not much clearance inside the hanger, so if you decide to screw-mount it, you'll need screws with a low-profile head so they don't interfere with the case.
I have my Pi in a FLIRC aluminum case so I made a mount that fit that case, and decided the best thing for my purpose was to "hang" mount it so that it was secure, but easily removable.
Here's what I came up with. It works very well. I can easily lift my Pi (in its case) out of the hanger and change the memory card or the USB cables, then drop it back into the hanger. And it lets the aluminum FLIRC case do it's heat-sink duty without adding another full wrapper.
This was made to accommodate the FLIRC case, but should work with any form-fitting case.
I have two versions - one for screw mounting and one for double-sided-sticky-tape mounting (which I used for attaching the hanger to my A1Up cab.)
The back plate is not very thick (2.5mm) and there's not much clearance inside the hanger, so if you decide to screw-mount it, you'll need screws with a low-profile head so they don't interfere with the case.
Similar models
thingiverse
free
Raspberry Pi 4B Flirc Case Mount For Ender 3/5 by Peterpiper05
...o pretty much any ender machine.
on a side note, even with all the cores maxed or overclocked this thing won't get above 50*c
cg_trader
$5
Raspberry Pi Flirc Case Cover | 3D
...de the raspberry pi flirc case top cover section. in case the pressfit is not enough, double sided tape can be used for mounting.
thingiverse
free
Robox with RPI Camera mount by juan15pablo
...0an but i added some parts to fit my needs and i edited the back of the case so it fits properly.
it is desinged to use m4 screw.
thingiverse
free
Hictop Prusa i3 Raspberry Pi LCD display mount by afaulkinberry
...o the back plate and 4 m3*20 screws to attach the case's "top". all of these screws were left over after assembly.
thingiverse
free
FLIRC case lid for OLED Display
...ere are two parts, the lid and a small piece to hold the display in place. to mount the pieces on the flirc case you need screws.
thingiverse
free
Raspberry Pi Mount - No Screws - Ender 3
... a raspberry pi case for octoprint without screws that has room for the camera cable, so i made this one.
fits my raspberry pi b.
thingiverse
free
Raspberry Pi Sleeve Case Mount by EG3Dprinting
... management to the pi. the frame screws that came with the printer are a bit too small to fit the bracket so i used m3x10 screws.
thingiverse
free
Raspberry Pi 7" Display Case
...a space on the right hand side for a panel mount usb socket and an aperture at the back for the power cable and any other cables.
thingiverse
free
Raspberry Pi 3 Drive Bay Mount/Case by brandonforty2
... it follows the cd drive standards so it should fit in any computer case with drive bays. the only tested case is an antec 900.
thingiverse
free
5 inch touch screen case for Raspberry Pi 3 by bredita
...;m sure you can do better. i printed it on a geetech i3 clone at too high speed, no supports, no brim, very variable temperature.
Flirc
thingiverse
free
FLIRC case lid for OLED Display
...ere are two parts, the lid and a small piece to hold the display in place. to mount the pieces on the flirc case you need screws.
thingiverse
free
Raspberry Flirc support
...k of the tv.
easy to install/uninstall, do not damage the case.
i made a second one for my brand new rpi4 (only 1 hdmi is usable)
thingiverse
free
Flirc LCD Bezel w/Stylus compartment by R3LapZ
..., multi-tool & hand file to make the rectangular hole in the flirc case. it is made of aluminum.
https://youtu.be/gacwoyjqis4
thingiverse
free
Flirc Raspberry Pi case lid by NedSc
... make them stronger. this shouldn't cause any issue, but it might make a tight squeeze on the hole next to the ethernet port.
thingiverse
free
Baseplate for Flirc Gen 2 Raspberry Pi3 Case by Printbus
...he gen 2 case from flirc. compatibility with other versions of the raspberry pi or with the original case from flirc is unknown.
thingiverse
free
Flirc 2.5 SSD / HDD Case for Raspi4 by CrunchyRich
...rwise you need complete support for the ssd housing.
after printing, cut of the small ssd slot blocking and leave a millimeter.
thingiverse
free
VESA 100 mount for Flirc for Raspberry Pi4 with SD Cover
...ts).
also an idea maker file is attached with supports.
air channels should even be able to move some air around the back.
enjoy!
thingiverse
free
Raspberry Pi 4B Flirc Case LED Window
...lower case cover.
light sanding may be needed on the larger flat surface to make sure case fully closes. (doesn't take much)
thingiverse
free
Raspberry Pi 4 Flirc and SSD enclosure by Zapdos
...terial being printed and having to be removed. no other supports were needed in the print.
hope this will be of good use to you.
Raspi
thingiverse
free
*raspi pico folder by imaicom
...*raspi pico folder by imaicom
thingiverse
raspi pico folder
thingiverse
free
Bad Raspi Reference by bonsen
...bad raspi reference by bonsen
thingiverse
a bad stl of a raspi 3b. only for testing.
thingiverse
free
Raspberry Stand for 3 Raspis by ingu78
...3 raspis by ingu78
thingiverse
raspberry stand for 3 raspis. there is enough space between the raspis to ensure optimal cooling.
thingiverse
free
*raspi pico Lego Mounter by imaicom
...*raspi pico lego mounter by imaicom
thingiverse
raspi pico lego mounter
thingiverse
free
*raspi pico my case by imaicom
...*raspi pico my case by imaicom
thingiverse
raspi pico my case
thingiverse
free
K8200 RasPi Cam Mount by robscar
...k8200 raspi cam mount by robscar
thingiverse
k8200 mount for raspi cam
thingiverse
free
Raspi Z case holder by dmuth
...raspi z case holder by dmuth
thingiverse
raspi z case holder for the original case and cam
thingiverse
free
RasPi Stand by yukihiro20200801
...raspi stand by yukihiro20200801
thingiverse
the stand for raspberry pi 3+ and 4.
thingiverse
free
RPCR10C - RasPi CR-10 Case by JMDesigns
...rpcr10c - raspi cr-10 case by jmdesigns
thingiverse
rpcr10c - raspi cr-10 case
thingiverse
free
*raspi pico Cap Stand by imaicom
...is a cap stand for raspi pico that can be attached to the end of a plastic bottle.
four m2 screws are required for installation.
Hanger
3d_export
$5
hanger
...hanger
3dexport
hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger coat hanger holder
hanger n260612 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Hanger
...hanger
3dexport
old-fashioned hanger of georgia
3ddd
$1
Hanger
...hanger
3ddd
вешалка
classic black hanger
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack peg
hanger n210712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger rack sanitary ware
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hall-stand rack hanger
hanger n250711 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.