Thingiverse
RaspberryPi Kubernetes stack by hsilomedus
by Thingiverse
Last crawled date: 4 years, 2 months ago
Layer board and a top with the kubernetes logo for creating a RaspberryPi 2 stack.
You will need a nice set of 2.5mm plastic / metal spacers with adequate nuts and bolts.
Print with a bigger infill percentage to ensure the boards will be strong enough.
The kubernetes logo is taken from the open-source repository on github: https://github.com/kubernetes/kubernetes/blob/master/logo.svg and converted to STL via http://svg2stl.com/.
You will need a nice set of 2.5mm plastic / metal spacers with adequate nuts and bolts.
Print with a bigger infill percentage to ensure the boards will be strong enough.
The kubernetes logo is taken from the open-source repository on github: https://github.com/kubernetes/kubernetes/blob/master/logo.svg and converted to STL via http://svg2stl.com/.