Raspberry Powerstation by Sjeppa

Last crawled date: 3 years, 4 months ago

This is a Power station for 4 Raspberries. My wall-mount plug for raspberry power is fully occupied and no free plug is available. So, I created a Power station for 4 Raspberries using only one plug for the transformer.
The basis is just a sleeve over the transformer as the transformer is mounted on a DIN-Rail it keeps the basis in place. Maybe I add something to fix/mount the station at a later stage.
-Update: OK, I created a copy of the basis with inserts for M3 nuts to fix/mount the basis at the transformer from to or button side (or both ;))
-Update: I changed the lid to be able to put a label above the Raspi text.
File change - Deckel-V2.stl
Parts I used (I bought all from a local electronic dealer)
Meanwell MDR-60-5 10 Ampere 5Volt
4 Relais Module (for Arduino/Raspberry)
4 Push Bottons Switch with Led (blue)
(push to switch on, another push to switch off)
4 USB Cable with open end cable
M3x16 mm allen screw
M3 nuts
M6x16mm flat head screw
Standard 230V Power cable
2 Wago 222-415
Cables: K05V-K 0,5mm2, Jumper wire cable female
Printed parts:
2 Wago 5-wire: 222-415 from my remixhttps://www.thingiverse.com/thing:4675584
The M6 threads in the distance rods need to be "cleaned" by a screw tap.