Thingiverse
Raspberry Pi4 Case with 1-2 SSD spaces
by Thingiverse
Last crawled date: 5 years, 4 months ago
Remix of bottom part raspberry pi4 case from https://www.thingiverse.com/thing:3714695 with added SSD places. There are 3 versions. For 1 SSD, for 2 SSDs and devirer version for separate faster print.
Please print all on a flat side to the bottom.
Top of the case was not changed, so please teak it from the remix source.
For devided parts no support needed. Use 3mm screws to connect parts. For devided parts 5 mm fits perfect, you can use longer with nut.
Better to use brim for good adhesion, but it is up to you.
Please print all on a flat side to the bottom.
Top of the case was not changed, so please teak it from the remix source.
For devided parts no support needed. Use 3mm screws to connect parts. For devided parts 5 mm fits perfect, you can use longer with nut.
Better to use brim for good adhesion, but it is up to you.