Thingiverse
raspberry pi zero W case by ntchris
by Thingiverse
Last crawled date: 4 years, 7 months ago
A raspberry pi zero case,
also provided a STEP file so you can easily modify the design.
features:
usb hole, mini hdmi hole, upper and bottom heat vent holes, camera ribbon cable holes, GPIO pin holes, micro-sd car holes.
PLA or PETG, but suggest using PETG because it's a bit higher temperature tolerant than PLA, since raspberry pi zero produce some heat while running. but PLA should work just fine I believe.
also require 4pcs 2.5mm or 2.6mm , 8mm long tapping screw.
also provided a STEP file so you can easily modify the design.
features:
usb hole, mini hdmi hole, upper and bottom heat vent holes, camera ribbon cable holes, GPIO pin holes, micro-sd car holes.
PLA or PETG, but suggest using PETG because it's a bit higher temperature tolerant than PLA, since raspberry pi zero produce some heat while running. but PLA should work just fine I believe.
also require 4pcs 2.5mm or 2.6mm , 8mm long tapping screw.