Thingiverse
Raspberry Pi Zero Unicorn / WaveShare RGB PHAT case by Collie147
by Thingiverse
Last crawled date: 4 years, 7 months ago
Based on https://www.thingiverse.com/thing:2625537 but tailored to fit a Raspberry Pi Zero and a Pimoroni Unicorn / WaveShare RGB LED Phat.
Two different options for the middle section.
Option A "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (no-standoffs).stl" requires
4 x 2.5M 8mm standoffs,
4 x 2.5m nuts and
4 x 2.5m screws (6-10mm in length should do)
Option B "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (standoffs).stl" requires
4 x 2.5m nuts and
4 x 2.5m 18mm screws
Two different options for the middle section.
Option A "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (no-standoffs).stl" requires
4 x 2.5M 8mm standoffs,
4 x 2.5m nuts and
4 x 2.5m screws (6-10mm in length should do)
Option B "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (standoffs).stl" requires
4 x 2.5m nuts and
4 x 2.5m 18mm screws