Thingiverse
Raspberry pi zero and ENC28J60 enclosure by hananbar
by Thingiverse
Last crawled date: 4 years, 8 months ago
This is an enclosure designed to hold Raspberry pi zero and a enc28j60 module so that all ports are available and facing the same way.
not printed ingridients:
raspberry pi zero (with microSD)
enc28j60 module - there are a lot of designs apparently - i used this mini version: https://www.aliexpress.com/item/ENC28J60-SPI-interface-network-module-Ethernet-module-mini-version/32341839317.html
8 M2x5 screws
the ethernet module is held in place by it's own port and small notch on one side and a notched pillar on the other. i used PLA seems it is flexible enough to bend a little to "catch" the board.
Enjoy
not printed ingridients:
raspberry pi zero (with microSD)
enc28j60 module - there are a lot of designs apparently - i used this mini version: https://www.aliexpress.com/item/ENC28J60-SPI-interface-network-module-Ethernet-module-mini-version/32341839317.html
8 M2x5 screws
the ethernet module is held in place by it's own port and small notch on one side and a notched pillar on the other. i used PLA seems it is flexible enough to bend a little to "catch" the board.
Enjoy