Thingiverse
Raspberry Pi Project Housing by SmartNOOB
by Thingiverse
Last crawled date: 4 years, 7 months ago
A housing for Raspberry Pi 3 which has about 25mm of additional space for your own electronics. It consist of two parts which are screwed together. The bottom part has a mountig for a 1/4" nut to mount the housing on top of a tripod. The housing is held together by four M3 screws and the according nuts.
Take the STL files, add your own holes for your plugs or LEDs and publish your housing as a remake of this thing. I modified the housing for a LoRaWan gateway (https://www.thingiverse.com/thing:2843380). The photos for this thing show the gateway housing. This is the raw project which lacks the TTN Logo on the side and the SMA plug.
Take the STL files, add your own holes for your plugs or LEDs and publish your housing as a remake of this thing. I modified the housing for a LoRaWan gateway (https://www.thingiverse.com/thing:2843380). The photos for this thing show the gateway housing. This is the raw project which lacks the TTN Logo on the side and the SMA plug.