Thingiverse
Raspberry Pi Pico - Case | GPIO fully accessible - !ResetPin Updated! by TueftelTyp
by Thingiverse
Last crawled date: 4 years, 2 months ago
A housing for an Raspberry Pi Pico.
All pins are freely accessible.
The top should snap fit.
There various versions with and without a cutout for GPIO access.
Since I do not have a printer available at this time, I unfortunately cannot test the accuracy of fit, but there should be enough tolerance.
Do you need a Solder Helper for the Pico ? -> https://www.thingiverse.com/thing:4751199
unfortunately there is no access to the reset button so far, but this will be made up and added as soon as possible.Updated 02.14.2021
As always, I would love to see your makes :)
All pins are freely accessible.
The top should snap fit.
There various versions with and without a cutout for GPIO access.
Since I do not have a printer available at this time, I unfortunately cannot test the accuracy of fit, but there should be enough tolerance.
Do you need a Solder Helper for the Pico ? -> https://www.thingiverse.com/thing:4751199
unfortunately there is no access to the reset button so far, but this will be made up and added as soon as possible.Updated 02.14.2021
As always, I would love to see your makes :)