Raspberry Pi / Pi Zero W GoPro-style Camera Mount by hillct

Last crawled date: 3 years, 2 months ago

Included here are the camera mount and swivel components, with a GoProStyle mating joint. Pictured in the first photo, are also a Raspberry Pi Zero W ultraSlim mount, found here: https://www.thingiverse.com/thing:2504847 and GoPro Mount arms & base found here: https://www.thingiverse.com/thing:2194278
This model is a slight remix of a model found here: https://cad.onshape.com/documents/38b99c4a6ea986a38ce072ee/w/75caf2f3a76fdf77faa14ea2/e/c6ac5f945c5a0bb05d541a37
The requirement of screws into the camera case was eliminated, in favor of swivel pins, to be installed after printing. You'll need to print two pins. There are two separate pins files but they're identical. I used an M3 screw (20mm) and nut to fasten the base to the swivel, although if you prefer to use all printed parts, you should be able to use this set of fasteners: https://www.thingiverse.com/thing:192259