Thingiverse
Raspberry Pi LANDZO case Ender 3 Pro Rail Mount by linklooklisten
by Thingiverse
Last crawled date: 4 years, 11 months ago
After searching for a while for a case/mount to fit a Pi 3B+ with a heatsink style case already on it, I got it on Amazon: https://www.amazon.com/gp/product/B07T3Z4RH4/, I figured to try and make one myself. Designed in Tinkercad, this is also my first time making something. I hope others find this useful!
Holes are for the SD card slot (as to make sure it doesn't SNAP the SD card (and the power supply micro USB port.
Supports are needed for the rail mounts which I got from flickeringsight https://www.thingiverse.com/thing:3344399
Supports tear right off, but you need to be careful around the rail mount pieces.
The Pi slides in from the front with the LANDZO case on, might need to bend the side of the case a little bit to fit it in, watch the tabs on the top of the printed mount. Those are to hold the Pi upright. I chose to go with a design like this so the fans aren't blocked at all.
If anyone has any advice, please let me know! I'm a newbie!
Holes are for the SD card slot (as to make sure it doesn't SNAP the SD card (and the power supply micro USB port.
Supports are needed for the rail mounts which I got from flickeringsight https://www.thingiverse.com/thing:3344399
Supports tear right off, but you need to be careful around the rail mount pieces.
The Pi slides in from the front with the LANDZO case on, might need to bend the side of the case a little bit to fit it in, watch the tabs on the top of the printed mount. Those are to hold the Pi upright. I chose to go with a design like this so the fans aren't blocked at all.
If anyone has any advice, please let me know! I'm a newbie!