Thingiverse
Raspberry Pi Camera 1.3 Reference by 3DPrintNOVA
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is a reference model I made using an actual raspberry pi camera version 1.3 (5 megapixel). I made all the measurements with calipers on the actual production camera. I created it to use as a negative in future projects. I did not intend it to be printed.
Note: The model used for the measurements says 'sunny' on connector to lens directly over the pins, there is another version of the 1.3 5mp camera that says 'sunny' over the band cable going to the pins. This version has slightly different dimensions.
If you need CAD design work please reach out to me at https://3dprintnova-plastic-fabrication-company.business.site/
Note: The model used for the measurements says 'sunny' on connector to lens directly over the pins, there is another version of the 1.3 5mp camera that says 'sunny' over the band cable going to the pins. This version has slightly different dimensions.
If you need CAD design work please reach out to me at https://3dprintnova-plastic-fabrication-company.business.site/