Thingiverse
Raspberry Pi B+ 2/3 Case (+RF433 emitter) for Prusa i3 (Anet A8 / Alunar M505 / P802) by ClementABADIE
by Thingiverse
Last crawled date: 4 years, 3 months ago
Add Repetier server to your Prusa i3 (Anet A8 / ALUNAR model) !
This case allow you to have a Raspberry Pi on your printer without modifying it !
Simply print and assemble !
RF433 emitter support !
Perfect with :
https://www.repetier-server.com/
http://octoprint.org/
http://cisana.net/3d-printer-server/
...
Parts required :
Raspberry Pi B+ 2/3
SD Card (https://elinux.org/RPi_SD_cards)
LAN Cable or Wifi USB dongle (only on RPi 2 because RPi 3 have wifi integrated)
Micro USB power.
USB A to USB B cable
Optionnal (Power remote control) :
RF433 emitter (https://www.samkear.com/hardware/control-power-outlets-wirelessly-raspberry-pi)
RF433 outlet
Print
Print 006 - 001 - 002 WITH support (it will close the RF433 space if you don't need it).
Print the "006 - 002 - 002" part ONLY IF you want to add the RF433 emitter (don't need support, print it larger face down)
This case allow you to have a Raspberry Pi on your printer without modifying it !
Simply print and assemble !
RF433 emitter support !
Perfect with :
https://www.repetier-server.com/
http://octoprint.org/
http://cisana.net/3d-printer-server/
...
Parts required :
Raspberry Pi B+ 2/3
SD Card (https://elinux.org/RPi_SD_cards)
LAN Cable or Wifi USB dongle (only on RPi 2 because RPi 3 have wifi integrated)
Micro USB power.
USB A to USB B cable
Optionnal (Power remote control) :
RF433 emitter (https://www.samkear.com/hardware/control-power-outlets-wirelessly-raspberry-pi)
RF433 outlet
Print 006 - 001 - 002 WITH support (it will close the RF433 space if you don't need it).
Print the "006 - 002 - 002" part ONLY IF you want to add the RF433 emitter (don't need support, print it larger face down)