Thingiverse
Raspberry Pi 7 Inch Touchscreen Home Assistant Wall Mount Dashboard by bobbyisbest
by Thingiverse
Last crawled date: 4 years, 8 months ago
A simple wall mount for the official Raspberry Pi 7" touchscreen, built so I can have a central Home Assistant dashboard next to my thermostat
The frames for the pi and screen are connected together with M3 hardware, and then the pi and screen are mounted onto the frames with the same
In total, requires 10 M3 screws and 10 M3 nuts
The whole thing is mounted with command strips, since I didn't wanna put holes in my apartment walls
TO DO:
-The mounting holes for the pi are a bit off, they need to be shifted down a few millimeters, but it works well enough
-The supports on the pi case are a pain to remove, needs some redesign to require less of them
The frames for the pi and screen are connected together with M3 hardware, and then the pi and screen are mounted onto the frames with the same
In total, requires 10 M3 screws and 10 M3 nuts
The whole thing is mounted with command strips, since I didn't wanna put holes in my apartment walls
TO DO:
-The mounting holes for the pi are a bit off, they need to be shifted down a few millimeters, but it works well enough
-The supports on the pi case are a pain to remove, needs some redesign to require less of them