Thingiverse
Raspberry Pi 4B Ender 3 Rails by Amunra13
by Thingiverse
Last crawled date: 4 years, 1 month ago
For Raspberry Pi 4B. I couldn't fine one with rails, so I remixed this in Tinkercad with https://www.thingiverse.com/thing:4176051
I had to make the top taller to avoid needing supports, so there is a little gap between the front i/o and the case.
Need:
4 M2.5x12 or tap M3x12 Bolts for fan
4 M2.5 or M3 Nuts
4 M2.5x25-30 bolt
4 M2.5 Nuts (Only if you can find long enough M2.5s)
You can use a shorter bolt if you go from the bottom. The case is held on the rails, so it doesn't need a perfect seal.
I had to make the top taller to avoid needing supports, so there is a little gap between the front i/o and the case.
Need:
4 M2.5x12 or tap M3x12 Bolts for fan
4 M2.5 or M3 Nuts
4 M2.5x25-30 bolt
4 M2.5 Nuts (Only if you can find long enough M2.5s)
You can use a shorter bolt if you go from the bottom. The case is held on the rails, so it doesn't need a perfect seal.