Thingiverse
Raspberry PI 4B Case + support for IKEA Method by alguiens
by Thingiverse
Last crawled date: 5 years, 3 months ago
This is a case for the raspberry pi 4b. It has a hole to screw a fan, as this one needs it more that its antecessors. There's also space in the case to let the air flow.
There's also a support that can be screwed to the IKEA Method and you can just simply insert the case in and remove it easily whenever you need to.
It has pre-designed supports so yo don't need to add them in the slicer. Just cut them after printing.
Screws needed:
2 X M3 15mm
2 X M3 10mm
2 X Wood screw 6 x 25mm
Nuts:
2 X M3 nuts needed (fan)
2 X M3 nuts optional (top cover)
There's also a support that can be screwed to the IKEA Method and you can just simply insert the case in and remove it easily whenever you need to.
It has pre-designed supports so yo don't need to add them in the slicer. Just cut them after printing.
Screws needed:
2 X M3 15mm
2 X M3 10mm
2 X Wood screw 6 x 25mm
Nuts:
2 X M3 nuts needed (fan)
2 X M3 nuts optional (top cover)