Thingiverse
Raspberry Pi 4 Case (POE) by Xeno4
by Thingiverse
Last crawled date: 5 years, 2 months ago
This is a Raspberry Pi 4 case that support a regular Raspberry Pi 4 or one with a POE hat. It is designed to accept a Noctua NF-A4-10 FLX fan. The fan replaces the fan that comes on the POE hat as standard.
It needs 4x M3 brass inserts (5mm depth), 4x M3 (12mm length) bolts, and screws to mount the board inside of the case (they just thread into the plastic).
Pictured it is printed in Prusament Galaxy Black PLA at 0.15mm layer heights. Supports should not be needed.
It needs 4x M3 brass inserts (5mm depth), 4x M3 (12mm length) bolts, and screws to mount the board inside of the case (they just thread into the plastic).
Pictured it is printed in Prusament Galaxy Black PLA at 0.15mm layer heights. Supports should not be needed.