Thingiverse
Raspberry Pi 4 and Camera Module v2 Mounts for Ender 3 v2 by Racerboy
by Thingiverse
Last crawled date: 4 years, 8 months ago
These brackets are used to mount a Raspberry Pi 4 and Camera Module v2-8 to the rear of an Ender 3v2 printer. A 50mm camera ribbon cable is required to comfortably reach.
Hardware used:
(x4) M2.5x12 screws to mount Pi and heatsink to rail bracket
(x4) M2x4 screws to mount camera module to enclosure
(x2) M4x12 screws and M4 nuts to attach brackets to arm
(x2) M5x12 screws to replace existing Y-axis motor mount screws (which are only M5x8)
Hardware used:
(x4) M2.5x12 screws to mount Pi and heatsink to rail bracket
(x4) M2x4 screws to mount camera module to enclosure
(x2) M4x12 screws and M4 nuts to attach brackets to arm
(x2) M5x12 screws to replace existing Y-axis motor mount screws (which are only M5x8)