Thingiverse
Raspberry Pi 2/3 Model B Octo Case by MakeItSo3D
by Thingiverse
Last crawled date: 4 years, 2 months ago
I designed this case for my little Raspberry Pi 2 Model B Based OctoPrint server.
Should also be compatible with the Raspberry Pi 3
I wanted it to be small and look as clean as possible.
It works really well with these fasteners:
https://www.mcmaster.com/#96817a890/=16tcis1
Though any M2.5 x 5 screw with sufficiently coarse threads should do.
I included a plain top as well if the Octopus isn't your thing.
You will need 8 screws total.
Should also be compatible with the Raspberry Pi 3
I wanted it to be small and look as clean as possible.
It works really well with these fasteners:
https://www.mcmaster.com/#96817a890/=16tcis1
Though any M2.5 x 5 screw with sufficiently coarse threads should do.
I included a plain top as well if the Octopus isn't your thing.
You will need 8 screws total.