Thingiverse
Raspberry Pi 2 Exoskeleton by boverby
by Thingiverse
Last crawled date: 4 years ago
Inspired by http://www.thingiverse.com/thing:374377 by SOUNDSK
His design was modified to fit the Raspberry Pi model 2/3 and provide
more mounting options.
Assembly can use 4x #2 screws or 4x M3x10 cap head screws to hold
the two halves together. Lots of other pass holes ( some with hex nut
recesses ) to allow more bracketry or mounting. The pc board is
"pinched" between the upper and lower components.
The assembly and the two halves supplied in Designspark format (.rsdoc).
This will allow you to modify any hole sizes or wall thicknesses
to work better on your printer.
RaspberryPi2 model derived from step file included in :https://grabcad.com/library/raspberry-pi-2-model-b-3d-cad-assembly-model-2
created by Robèrt Akòpov
His design was modified to fit the Raspberry Pi model 2/3 and provide
more mounting options.
Assembly can use 4x #2 screws or 4x M3x10 cap head screws to hold
the two halves together. Lots of other pass holes ( some with hex nut
recesses ) to allow more bracketry or mounting. The pc board is
"pinched" between the upper and lower components.
The assembly and the two halves supplied in Designspark format (.rsdoc).
This will allow you to modify any hole sizes or wall thicknesses
to work better on your printer.
RaspberryPi2 model derived from step file included in :https://grabcad.com/library/raspberry-pi-2-model-b-3d-cad-assembly-model-2
created by Robèrt Akòpov