Thingiverse
Rancilio Rocky Doserless Conversion by Seanery
by Thingiverse
Last crawled date: 4 years, 4 months ago
Rancilio Rocky Doser to Doserless conversion parts.
This works for the version of the Rocky that has 2 holes on either side of the front housing. The top hole is slightly smaller than the bottom. There are holes in the portafilter supports, but you may need to drill them slightly, depending on the screws you use. I used a narrow wood screw with a washer on each hole.
To install the spout, you'll need to take the front housing off. It's a simple fit. Once in place I added a little hot glue to keep the spout from wiggling.
The portafilter support was designed around a standard 58mm basket. I checked it with a Nuova Simonelli double spout and my bottomless. Also works with my Bezerra baskets.
This works for the version of the Rocky that has 2 holes on either side of the front housing. The top hole is slightly smaller than the bottom. There are holes in the portafilter supports, but you may need to drill them slightly, depending on the screws you use. I used a narrow wood screw with a washer on each hole.
To install the spout, you'll need to take the front housing off. It's a simple fit. Once in place I added a little hot glue to keep the spout from wiggling.
The portafilter support was designed around a standard 58mm basket. I checked it with a Nuova Simonelli double spout and my bottomless. Also works with my Bezerra baskets.