Rally Obedience Sign-Stand by willie42

Last crawled date: 3 years, 1 month ago

For our training I created this simple stands.
Take the sign (216 mm is the hight of the laminated print) and put them behind the clips. Move the stand to the back and place the thing whereever you want.
The construction is very light, so you can use a tent spike to fix the signs, if it is windy.
There are two versions - one is foldable and thus more suitable for smaller printbeds.
If you want to use it in the sun, you should better take ABS ;)
Prints without supoort.
Print
ro_halter (22 cm long) and ro_stuetze for version 1
rally_halter_v2_part1, rally_halter_v2_part2 and ro_stuetze for version 2 - (foldable)
ro_halter_V3 and stuetze3_lang for the version with the longer leg.
Take a piece of 1.8 mm filament for the hinge and use a lighter (flame) to make the ends soft and than press them flat so it wont slip out.
Still working on thoose stands to improve them. On uneven ground and/or on windy days the stability isn´t that good as I hoped. So I drew a version with a longer "stuetze". This is more stable - stl-file will soon follow after some more testing.
This is where you do find the signs.http://www.vdh.de/fileadmin/media/hundesport/rally_obedience/2016/RO_Regelwerk_VDH_3.0_Stand_01-2017_Anhang_1_UEbungsschilder_VDH_10-06-16_HP_.pdf
UPDATE: Added a Version 3 with a longer leg for a better stand. Used this occasion to exchande "stuetze" with a new one wirth a strengthened foot.