Thingiverse
Radial fan / Radialventilator - 125RL by CONSTRUCTeR
by Thingiverse
Last crawled date: 3 years, 1 month ago
Radial fan / Radialventilator - 125RL
https://youtu.be/nlkdPC0x1gI
As announced, I designed a complete fan unit for the Impeller - 125-6X. The construction includes a spiral housing, a holder for the 12V DC motor, two ducts with bayonet fitting and a stand. Parts for a right- and left-turning version are available. I also added mirrored geometries to the impeller- 125RL-6X (https://www.thingiverse.com/thing:2939990).
The rotating impeller pulls air inside the housing and pushes it radially into the spiral channel. Along the volutes increasing cross section, more and more pressure builds up, which finally escapes at the outlet. The resulting pressure difference (negative pressure - overpressure) leads to a permanent air movement, by adding kinetic energy to the medium. A Fan with backward curved blades and a spiral housing can achieve high pressures and efficiencies compared to other variants. Those machines are great for moving a certain amount of air against strong flow resistances, like filtration systems, long ducts or heat exchangers.
The current design is a first attempt, in the next step is to measure the characteristics of the fan (pressure, air flow ...). After that I would like to make some changes and check their effect. The goal is to develop a powerful 3D-printable fan through several iterations.
If someone from the community has ideas for improvement, please write in the comments!
/
Wie angekündigt habe ich für das Laufrad - 125-6X eine komplette Ventilator Einheit konstruiert. Der Aufbau besteht aus einem Schneckengehäuse, eine Halterung für den 12V DC Motor, den beiden Stutzen mit Bajonett Verschluss und einem Standfuss. Es sind Teile für eine rechts- und linksdrehende Variante. Ich habe entsprechend gespiegelte Geometrien zum Laufrad - 125RL-6X hinzugefügt (https://www.thingiverse.com/thing:2939990).
Durch das rotierende Laufrad wird Luft in das Gehäuse eingesaugt und radial in den Schneckenkanal ausgeworfen. Entlang dem steigenden Querschnitt der Spiralform baut sich mehr und mehr Druck auf, der schließlich an der Ausblasöffnung entweicht. Die entstehende Druck Differenz (Unterdruck-Überdruck) führt zu einer permanenten Luftbewegung, indem kinetische Energie auf das Medium übertragen wird. Ein Ventilator mit rückwärtsgekrümmten Schaufeln und Schneckengehäuse kann im Vergleich zu anderen Varianten hohe Drücke und Wirkungsgrade erzielen. Diese Maschinen sind daher gut geeignet um eine bestimmte Luftmenge gegen starke Strömungswiderstände zu fördern, wie z.B. Filtersysteme, lange Kanalstrecken oder Wärmetauscher.
Das aktuelle Design ist ein erster Versuch, im nächsten Schritt sollen die Kennwerte des Ventilators bestimm werden (Druck, Luftmenge...). Danach möchte ich einige Änderungen vornehmen und deren Wirkung überprüfen. Das Ziel ist durch mehrere Iterationen einen leistungsfähigen 3D-Druck Ventilator zu entwickeln.
Wenn jemand aus der Community Ideen für Verbesserungen hat, bitte in die Kommentare schreiben!
!!!Warning!!!
Using the provided parts as a rotating fan can be dangerous! It must be ensured that all necessary safety measures are taken (e.g. safety goggles)! Usage at your own risk!
/
!!!Achtung!!!
Die Verwendung der bereitgestellten Teile als drehender Ventilator kann gefährlich sein. Es ist sicherzustellen, dass alle erforderlichen Sicherheitsmaßnahmen getroffen werden (z.B. Schutzbrille)! Die Nutzung erfolgt auf eigene Gefahr!
Printparameter/Druckparameter
Printer/Drucker: Anycubic Kossel Linear Plus
Software: Cura
Material: PLA - 1.75 mm
Temp. Extruder: 200 °C
Temp. Bed/Bett: 60 °C
Layerheight/Schichthöhe: 0.2 mm
Perimeters/Umrissbahnen: 2
Perimeter width/Bahnbreite: 0.4 mm
Solid Top Bottom Layer/Volle Boden- und Dachschichten: 3
Infill/Fülldichte: 25 %
Print speed/Druckgeschwindigkeit: 60 mm/s
No Support needed/keine Stützkonstruktion nötig
Parts/Teile
Fan Housing/Ventilatorgehaeuse - R-L
⦁ 4x M5 - Nut/Mutter
⦁ 5x M5x10 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 183 - Y 169 - Z 54 mm
⦁ 7 h 25 m
⦁ 83 g
Housing cover/Gehaeusedeckel - R-L
⦁ 9x M5 - Nut/Mutter
⦁ X 183 - Y 169 - Z 10 mm
⦁ 5 h 16 m
⦁ 56 g
Intake holder/Ansaughalter - R-L
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 136 - Y 136 - Z 22 mm
⦁ 4 h 9 m
⦁ 49 g
Intake mount/Ansaugbefestigung - R-L
⦁ 4x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 171 - Y 171 - Z 10 mm
⦁ 4 h 42 m
⦁ 56 g
Intake duct/Ansaugstutzen
⦁ Glue to/Kleben an - Part-Teil 04 Intake mount-Ansaugbefestigung
⦁ X 114 - Y 114 - Z mm
⦁ 3 h 14 m
⦁ 48 g
⦁ Perimeter width/Bahnbreite: 0.5 mm
⦁ Infill/Fülldichte: 0 %
Outlet mount/Ausblasbefestigung (2 Parts/Teile) - R-L
⦁ 8x M5 - Nut/Mutter
⦁ 2x M5x20 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 107 - Y 93 - Z 24 mm
⦁ 3 h 7 m
⦁ 36 g
Outlet duct/Ausblasstutzen - R-L
⦁ 6x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 107 - Y 102 - Z 150 mm
⦁ 4 h 25 m
⦁ 70 g
⦁ Perimeter width/Bahnbreite: 1.1 mm
Motor plate/Motorplatte - R-L
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 136 - Y 136 - Z 4 mm
⦁ 3 h 1 m
⦁ 33 g
Motor holder/Motorhalter
⦁ Motor Ø 35.5 mm
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 87 - Y 87 - Z 17 mm
⦁ 1 h 38 m
⦁ 17 g
Motor clamp/Motorklemme (2 Parts/Teile)
⦁ 2x M5 - Nut/Mutter
⦁ 2x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 4x M5x25 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 62 - Y 54 - Z 14 mm
⦁ 1 h 3 m
⦁ 10 g
Stand mount/Standfussbefestigung (5 Parts/Teile)
⦁ 4x M5 - Nut/Mutter
⦁ 2x M5 - Butterfly nut/Flügelmutter
⦁ 2x M5 - Washer/U-Scheibe
⦁ 4x M5x20 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 2x M5x30 mm - Hex bolt/Sechskantschraube
⦁ X 128 - Y 136 - Z 10 mm
⦁ 2 h 59 m
⦁ 40 g
Stand base/Standfussverbinder
⦁ 4x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 148 - Y 148 - Z 10 mm
⦁ 3 h 28 m
⦁ 37 g
⦁ Perimeters/Umrissbahnen: 3
⦁ Solid Top Bottom Layer/Volle Boden- und Dachschichten: 4
Stand leg/Standbein (4 Parts/Teile)
⦁ 4x M5 - Nut/Mutter
⦁ 4x Rubber/Gummifüße
⦁ X 165 - Y 167 - Z 15 mm
⦁ 4 h 9 m
⦁ 47 g
⦁ Perimeters/Umrissbahnen: 3
⦁ Solid Top Bottom Layer/Volle Boden- und Dachschichten: 4
Stand rise/Standfussverlaengerung (3 Parts/Teile)
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x25 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 175 - Y 132 - Z 10 mm
⦁ 5 h 35 m
⦁ 60 g
Bayonet ring1/Bajonettring1 (2 Parts/Teile)
⦁ Glue together/Zusammenkleben
⦁ 1x O-ring seal/O-Ring Dichtung - Ø 105 x 3 mm
⦁ X 174 - Y 150 - Z 16 mm
⦁ 3 h 38 m
⦁ 40 g
Bayonet ring2/Bajonettring2 (2 Parts/Teile)
⦁ Glue together/Zusammenkleben
⦁ X 174 - Y 150 - Z 16 mm
⦁ 3 h 27 m
⦁ 40 g
Bayonet ring3/Bajonettring3 (2 Parts/Teile)
⦁ Glue together/Zusammenkleben
⦁ X 174 - Y 151 - Z 8 mm
⦁ 3 h 6 m
⦁ 33 g
Bayonet hook/Bajonetthaken (4 Parts/Teile)
⦁ Glue to/Kleben an - Part-Teil 17 Bayonet ring3/Bajonettring3
⦁ X 61 - Y 75 - Z 35 mm
⦁ 2 h 33 m
⦁ 38 g
⦁ Perimeters/Umrissbahnen: 3
⦁ Solid Top Bottom Layer/Volle Boden- und Dachschichten: 4
Bayonet duct/Bajonettstutzen
⦁ Glue to/Kleben an - Part-Teil 16 Bayonet ring2/Bajonettring2
⦁ X 101 - Y 101 - Z 50 mm
⦁ 2 h 46 m
⦁ 34 g
⦁ Perimeter width/Bahnbreite: 0.9 mm
Summary/Zusammenfassung
⦁ Printtime/Druckzeit: 67 h 2 m
⦁ PLA: 827 g
Purchase/Zukauf
⦁ 47x M5 - Nut/Mutter
⦁ 5x M5x10 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 12x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 14x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 6x M5x20 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 8x M5x25 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 2x M5x30 mm - Hex bolt/Sechskantschraube
⦁ 2x M5 - Butterfly nut/Flügelmutter
⦁ 2x M5 - Washer/U-Scheibe
⦁ 4x Rubber buffers/Gummipuffer - Pocket/Bohrung Ø 5 x 3 mm
⦁ 1x O-ring seal per bayonet/O-Ring Dichtung pro Bajonett - Ø 105 x 3 mm
https://youtu.be/nlkdPC0x1gI
As announced, I designed a complete fan unit for the Impeller - 125-6X. The construction includes a spiral housing, a holder for the 12V DC motor, two ducts with bayonet fitting and a stand. Parts for a right- and left-turning version are available. I also added mirrored geometries to the impeller- 125RL-6X (https://www.thingiverse.com/thing:2939990).
The rotating impeller pulls air inside the housing and pushes it radially into the spiral channel. Along the volutes increasing cross section, more and more pressure builds up, which finally escapes at the outlet. The resulting pressure difference (negative pressure - overpressure) leads to a permanent air movement, by adding kinetic energy to the medium. A Fan with backward curved blades and a spiral housing can achieve high pressures and efficiencies compared to other variants. Those machines are great for moving a certain amount of air against strong flow resistances, like filtration systems, long ducts or heat exchangers.
The current design is a first attempt, in the next step is to measure the characteristics of the fan (pressure, air flow ...). After that I would like to make some changes and check their effect. The goal is to develop a powerful 3D-printable fan through several iterations.
If someone from the community has ideas for improvement, please write in the comments!
/
Wie angekündigt habe ich für das Laufrad - 125-6X eine komplette Ventilator Einheit konstruiert. Der Aufbau besteht aus einem Schneckengehäuse, eine Halterung für den 12V DC Motor, den beiden Stutzen mit Bajonett Verschluss und einem Standfuss. Es sind Teile für eine rechts- und linksdrehende Variante. Ich habe entsprechend gespiegelte Geometrien zum Laufrad - 125RL-6X hinzugefügt (https://www.thingiverse.com/thing:2939990).
Durch das rotierende Laufrad wird Luft in das Gehäuse eingesaugt und radial in den Schneckenkanal ausgeworfen. Entlang dem steigenden Querschnitt der Spiralform baut sich mehr und mehr Druck auf, der schließlich an der Ausblasöffnung entweicht. Die entstehende Druck Differenz (Unterdruck-Überdruck) führt zu einer permanenten Luftbewegung, indem kinetische Energie auf das Medium übertragen wird. Ein Ventilator mit rückwärtsgekrümmten Schaufeln und Schneckengehäuse kann im Vergleich zu anderen Varianten hohe Drücke und Wirkungsgrade erzielen. Diese Maschinen sind daher gut geeignet um eine bestimmte Luftmenge gegen starke Strömungswiderstände zu fördern, wie z.B. Filtersysteme, lange Kanalstrecken oder Wärmetauscher.
Das aktuelle Design ist ein erster Versuch, im nächsten Schritt sollen die Kennwerte des Ventilators bestimm werden (Druck, Luftmenge...). Danach möchte ich einige Änderungen vornehmen und deren Wirkung überprüfen. Das Ziel ist durch mehrere Iterationen einen leistungsfähigen 3D-Druck Ventilator zu entwickeln.
Wenn jemand aus der Community Ideen für Verbesserungen hat, bitte in die Kommentare schreiben!
!!!Warning!!!
Using the provided parts as a rotating fan can be dangerous! It must be ensured that all necessary safety measures are taken (e.g. safety goggles)! Usage at your own risk!
/
!!!Achtung!!!
Die Verwendung der bereitgestellten Teile als drehender Ventilator kann gefährlich sein. Es ist sicherzustellen, dass alle erforderlichen Sicherheitsmaßnahmen getroffen werden (z.B. Schutzbrille)! Die Nutzung erfolgt auf eigene Gefahr!
Printparameter/Druckparameter
Printer/Drucker: Anycubic Kossel Linear Plus
Software: Cura
Material: PLA - 1.75 mm
Temp. Extruder: 200 °C
Temp. Bed/Bett: 60 °C
Layerheight/Schichthöhe: 0.2 mm
Perimeters/Umrissbahnen: 2
Perimeter width/Bahnbreite: 0.4 mm
Solid Top Bottom Layer/Volle Boden- und Dachschichten: 3
Infill/Fülldichte: 25 %
Print speed/Druckgeschwindigkeit: 60 mm/s
No Support needed/keine Stützkonstruktion nötig
Parts/Teile
Fan Housing/Ventilatorgehaeuse - R-L
⦁ 4x M5 - Nut/Mutter
⦁ 5x M5x10 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 183 - Y 169 - Z 54 mm
⦁ 7 h 25 m
⦁ 83 g
Housing cover/Gehaeusedeckel - R-L
⦁ 9x M5 - Nut/Mutter
⦁ X 183 - Y 169 - Z 10 mm
⦁ 5 h 16 m
⦁ 56 g
Intake holder/Ansaughalter - R-L
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 136 - Y 136 - Z 22 mm
⦁ 4 h 9 m
⦁ 49 g
Intake mount/Ansaugbefestigung - R-L
⦁ 4x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 171 - Y 171 - Z 10 mm
⦁ 4 h 42 m
⦁ 56 g
Intake duct/Ansaugstutzen
⦁ Glue to/Kleben an - Part-Teil 04 Intake mount-Ansaugbefestigung
⦁ X 114 - Y 114 - Z mm
⦁ 3 h 14 m
⦁ 48 g
⦁ Perimeter width/Bahnbreite: 0.5 mm
⦁ Infill/Fülldichte: 0 %
Outlet mount/Ausblasbefestigung (2 Parts/Teile) - R-L
⦁ 8x M5 - Nut/Mutter
⦁ 2x M5x20 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 107 - Y 93 - Z 24 mm
⦁ 3 h 7 m
⦁ 36 g
Outlet duct/Ausblasstutzen - R-L
⦁ 6x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 107 - Y 102 - Z 150 mm
⦁ 4 h 25 m
⦁ 70 g
⦁ Perimeter width/Bahnbreite: 1.1 mm
Motor plate/Motorplatte - R-L
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 136 - Y 136 - Z 4 mm
⦁ 3 h 1 m
⦁ 33 g
Motor holder/Motorhalter
⦁ Motor Ø 35.5 mm
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 87 - Y 87 - Z 17 mm
⦁ 1 h 38 m
⦁ 17 g
Motor clamp/Motorklemme (2 Parts/Teile)
⦁ 2x M5 - Nut/Mutter
⦁ 2x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 4x M5x25 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 62 - Y 54 - Z 14 mm
⦁ 1 h 3 m
⦁ 10 g
Stand mount/Standfussbefestigung (5 Parts/Teile)
⦁ 4x M5 - Nut/Mutter
⦁ 2x M5 - Butterfly nut/Flügelmutter
⦁ 2x M5 - Washer/U-Scheibe
⦁ 4x M5x20 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 2x M5x30 mm - Hex bolt/Sechskantschraube
⦁ X 128 - Y 136 - Z 10 mm
⦁ 2 h 59 m
⦁ 40 g
Stand base/Standfussverbinder
⦁ 4x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 148 - Y 148 - Z 10 mm
⦁ 3 h 28 m
⦁ 37 g
⦁ Perimeters/Umrissbahnen: 3
⦁ Solid Top Bottom Layer/Volle Boden- und Dachschichten: 4
Stand leg/Standbein (4 Parts/Teile)
⦁ 4x M5 - Nut/Mutter
⦁ 4x Rubber/Gummifüße
⦁ X 165 - Y 167 - Z 15 mm
⦁ 4 h 9 m
⦁ 47 g
⦁ Perimeters/Umrissbahnen: 3
⦁ Solid Top Bottom Layer/Volle Boden- und Dachschichten: 4
Stand rise/Standfussverlaengerung (3 Parts/Teile)
⦁ 4x M5 - Nut/Mutter
⦁ 4x M5x25 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ X 175 - Y 132 - Z 10 mm
⦁ 5 h 35 m
⦁ 60 g
Bayonet ring1/Bajonettring1 (2 Parts/Teile)
⦁ Glue together/Zusammenkleben
⦁ 1x O-ring seal/O-Ring Dichtung - Ø 105 x 3 mm
⦁ X 174 - Y 150 - Z 16 mm
⦁ 3 h 38 m
⦁ 40 g
Bayonet ring2/Bajonettring2 (2 Parts/Teile)
⦁ Glue together/Zusammenkleben
⦁ X 174 - Y 150 - Z 16 mm
⦁ 3 h 27 m
⦁ 40 g
Bayonet ring3/Bajonettring3 (2 Parts/Teile)
⦁ Glue together/Zusammenkleben
⦁ X 174 - Y 151 - Z 8 mm
⦁ 3 h 6 m
⦁ 33 g
Bayonet hook/Bajonetthaken (4 Parts/Teile)
⦁ Glue to/Kleben an - Part-Teil 17 Bayonet ring3/Bajonettring3
⦁ X 61 - Y 75 - Z 35 mm
⦁ 2 h 33 m
⦁ 38 g
⦁ Perimeters/Umrissbahnen: 3
⦁ Solid Top Bottom Layer/Volle Boden- und Dachschichten: 4
Bayonet duct/Bajonettstutzen
⦁ Glue to/Kleben an - Part-Teil 16 Bayonet ring2/Bajonettring2
⦁ X 101 - Y 101 - Z 50 mm
⦁ 2 h 46 m
⦁ 34 g
⦁ Perimeter width/Bahnbreite: 0.9 mm
Summary/Zusammenfassung
⦁ Printtime/Druckzeit: 67 h 2 m
⦁ PLA: 827 g
Purchase/Zukauf
⦁ 47x M5 - Nut/Mutter
⦁ 5x M5x10 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 12x M5x12 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 14x M5x16 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 6x M5x20 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 8x M5x25 mm - Hexagon socket head screws/Innensechskant Zylinderkopfschrauben
⦁ 2x M5x30 mm - Hex bolt/Sechskantschraube
⦁ 2x M5 - Butterfly nut/Flügelmutter
⦁ 2x M5 - Washer/U-Scheibe
⦁ 4x Rubber buffers/Gummipuffer - Pocket/Bohrung Ø 5 x 3 mm
⦁ 1x O-ring seal per bayonet/O-Ring Dichtung pro Bajonett - Ø 105 x 3 mm
Similar models
thingiverse
free
Dual Extruder by Psycho1981
...ng:
4x allen screw m5
4x square nut m5
4x washer m5
electronic:
-ramps 1.4 board
-atx power supply
-firmware "marlin"
thingiverse
free
T-clamp by NL_MGX
...od that will require some machining.
opening is ø125mm. the model should not be scaled due to the sockets for the nuts and screws
thingiverse
free
height adjustable optical bench (Zeiss) - höheneinstellbare optische Bank aus Zeiss Dreikantprofil by Ce-ha
...m3 muttern mit den madenschrauben zur befestigung der endkappe und die m10 schrauben zur verbindung mit dem zeiss dreiecksprofil.
thingiverse
free
Mini Kossel 1.75mm extruder by wallie
...et head cap screw
2x spring
1x m5 pneumatic straight threaded-to-tube adapter, push in 4 mm 4mm male
tools
m5 manual screw tap
thingiverse
free
Adjustable phone/tablet stand by Johno_80
...
all printed parts, clip 2x
m5 x 16 mm screw - 2x
m5 self locking nut - 2x
m3x5 mm screw - 2x
washer 3.2 mm - 2x
washer 4 mm - 4x
thingiverse
free
Suport laser spindle by ojao_gabriel
...cap screw m3 x 16
2x - hexagon socket cap screw m3 x 12
2x - hexagon socket cap screw m3 x 10
4x - nut m3
that cooler have ø60mm.
thingiverse
free
Multifix AB indicator holder by Maker2Tester
...n benötigt zur fixierung der messuhr:
1 x zylinderschraube mit innensechskant (din 912) m5 x 20mm
1 x vierkantmutter m5 (din 557)
thingiverse
free
Ender 3 [PRO] Filament Sensor & Jam
...ired :
2x micro switch v-156-1c25 or other option --> aliexpress
2x screw m3x10
4x screw and nut m3x15
2x screw m5
2x t nut m5
grabcad
free
Hexagonal Socket Head Screw
...hexagonal socket head screw
grabcad
m4 x 25.4 mm hexagonal socket head screw
thingiverse
free
Adjustable phone tablet stand by Johno_80
... 2x (you can use the length up to 25mm)
m3 x 5 mm screw - 2x
washer 3,2 mm - 2x
washer 4,1 mm - 4x
assembly is straight forward.
Radialventilator
thingiverse
free
Radial Fan Impeller / Radialventilator Laufrad - 125RL-6X by CONSTRUCTeR
... top bottom layer / volle boden- und dachschichten: 2
infill / fülldichte: 20 %
no support needed / keine stützkonstruktion nötig
thingiverse
free
Big radial Fan by Dionarap
...big radial fan by dionarap thingiverse deutsch: ein grosser radialventilator der von einem cpu-lüfter(92mm) angetrieben wird. um die maximale...
grabcad
free
FreeCad Radialventilator
...cad
a radialventilator drawn in freecad. i was inspired by the following tutorial (https://www.youtube.com/watch?v=fwkxsd45svw).
3dwarehouse
free
Radialventilator
...radialventilator
3dwarehouse
Radial
3d_ocean
$5
Radial engine
...dial engine
3docean
engine radial
this is a radial engine used by the old airplanes. it is made in autodesk inventor and autocad.
3d_export
$5
radial engine
...ne , clearly shows how a radial engine works and all the parts present in it for a student or an engineer to have a glans on it .
3d_export
$5
shaft radial bearing
...shaft radial bearing
3dexport
shaft radial bearing
turbosquid
$7
Radial engine
...bosquid
royalty free 3d model radial engine for download as on turbosquid: 3d models for games, architecture, videos. (1672376)
turbosquid
$7
Radial Tyre
...osquid
royalty free 3d model radial tyre for download as max on turbosquid: 3d models for games, architecture, videos. (1433150)
turbosquid
$60
Radial engine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
VOITH RADIAL PROPELLER
...alty free 3d model voith radial propeller for download as max on turbosquid: 3d models for games, architecture, videos. (1338129)
3d_export
$20
radial engine assembly
...radial engine assembly
3dexport
turbosquid
$4
Radial Hair Brush
... 3d model radial hair brush for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1183870)
turbosquid
$39
Wheel ATS Radial
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Constructer
3d_export
$21
construction
...construction
3dexport
construction 8k texture
3d_export
$20
construction worker
...construction worker
3dexport
construction worker
3d_export
$65
Construction
...construction
3dexport
simple rendering of the scene file
3d_export
$65
Construction
...construction
3dexport
simple rendering of the scene file
3d_export
$65
Construction
...construction
3dexport
simple rendering of the scene file
3d_export
$65
Construction
...construction
3dexport
simple rendering of the scene fil
3d_export
$65
construction
...construction
3dexport
simple rendering of the scene file
3d_export
$5
construction barrier
...construction barrier
3dexport
construction barrier + 8k texture
3d_export
$5
construction barrier
...construction barrier
3dexport
construction barrier + 8k texture
3d_ocean
$19
Steel Construction
...steel construction
3docean
construction frame h-beam house steel
4 models of steel construction. maya, obj, fbx
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)