Thingiverse
Racks for Crowsfoot & Flare Nut socket wrenches by Gx1400
by Thingiverse
Last crawled date: 4 years, 2 months ago
Racks for Crowsfoot & Flare Nut socket wrenches
Printed rack for crowsfoot & flare nut socket wrenches
SAE Flare nut wrenches: Sunex 9708
Metric Flare nut wrenches: Sunex 9710M
SAE crowsfoot wrenches: Gearwrench 81908
Metric crowsfoot wrenches: Gearwrench 81909
Design driven from measurements into parameter variables in F360. Measured throat opening, depth, thickness, and width. Pics below showing measurement method.
I ordered these Magnets from amazon to see if the rack benefits, but the wrenches are pretty heavy, so may not be necessary. As of 2/17/2021, have not received or tested.
Changelog
2021/02/17 - Initial commit
2021/03/22 - Update with final designs
Design
Autocad Fusion 360
Slicer
Ultimaker Cura 4.8.0
Printer: Creality CR6 SE
Layer Height: 0.2mm
Infill Density: 10%
Infill Pattern: Grid
Filament: Inland PLA+ 1.75mm (RED = SAE, BLUE = Metric)
Material: PLA+
Print Temperature: 215 degrees C
Printed rack for crowsfoot & flare nut socket wrenches
SAE Flare nut wrenches: Sunex 9708
Metric Flare nut wrenches: Sunex 9710M
SAE crowsfoot wrenches: Gearwrench 81908
Metric crowsfoot wrenches: Gearwrench 81909
Design driven from measurements into parameter variables in F360. Measured throat opening, depth, thickness, and width. Pics below showing measurement method.
I ordered these Magnets from amazon to see if the rack benefits, but the wrenches are pretty heavy, so may not be necessary. As of 2/17/2021, have not received or tested.
Changelog
2021/02/17 - Initial commit
2021/03/22 - Update with final designs
Design
Autocad Fusion 360
Slicer
Ultimaker Cura 4.8.0
Printer: Creality CR6 SE
Layer Height: 0.2mm
Infill Density: 10%
Infill Pattern: Grid
Filament: Inland PLA+ 1.75mm (RED = SAE, BLUE = Metric)
Material: PLA+
Print Temperature: 215 degrees C