Thingiverse
RaceWhoop 2.5" by Babouch
by Thingiverse
Last crawled date: 4 years, 6 months ago
Based on the Racewhoop by FreeZillion https://www.thingiverse.com/thing:4608171
Support Cam 14mm and 19mm
You'll need some stuff to build it
M2 Screws (at least 14mm and 20mm)
M2 Nuts
M2 Washers
M3 Screws 35mm
M3 Nuts
M3 Washers
Thes ducts showed on the pictures are printed at 102% on X and Y axis, it's a trade between efficiency and reliability of the props in case of shock, the gap of the duct printed at 100% is more tight so do your own tests.
Support Cam 14mm and 19mm
You'll need some stuff to build it
M2 Screws (at least 14mm and 20mm)
M2 Nuts
M2 Washers
M3 Screws 35mm
M3 Nuts
M3 Washers
Thes ducts showed on the pictures are printed at 102% on X and Y axis, it's a trade between efficiency and reliability of the props in case of shock, the gap of the duct printed at 100% is more tight so do your own tests.