R_E_R_F or RERF Calibration Matrix for Anycubic Photon Mono by TheMadMan

Last crawled date: 3 years, 2 months ago

This is a R_E_R_F test file for the Anycubic Photon Mono. All the ones I found out there took a while to run, so in the interest of saving time and resin, I created a R_E_R_F file that is heavily inspired by the ResinXP2-ValidationMatrix_200701 (https://github.com/Photonsters/Resin-exposure-finder-v2/releases/download/BETA_2.1/ResinXP2-ValidationMatrix_200701.stl), but was 100% created from scratch.
Simply slice the file in your slicer and name the file "R_E_R_F" (without the quotes). The end file should be named, with file type extension, "R_E_R_F.pwmo" (without the quotes.
The top left file box will be the base exposure you put in the slicer. Then exposure time increments by +0.4 second top to bottom, left to right (in that order). Each tile has the additional exposure time written on the model but it is a little small and can be hard to read, I will edit this at a later date and release a revision.
The while print should be done printing in 10-14 minutes (depending on base exposure time) and takes very little resin.