Thingiverse
r9 SX case - mounts to Zohd Talon GT Rebel carbon spar by advancedenergy
by Thingiverse
Last crawled date: 4 years, 11 months ago
Rotate X axis; 90deg; support; 50% fill, 3 ring skirt. Print TPU
fits tight on the spar to keep from spinning around or sliding... if its too tight, heat it a little with a heat gun while its on the spar, itll resize itself... but not too much heat, itll stretch too far.
I use this with the r9 double antenna mount for the zohd talon, also found here on thingiverse, keeps things off the floor of the fuselage
fits tight on the spar to keep from spinning around or sliding... if its too tight, heat it a little with a heat gun while its on the spar, itll resize itself... but not too much heat, itll stretch too far.
I use this with the r9 double antenna mount for the zohd talon, also found here on thingiverse, keeps things off the floor of the fuselage