Thingiverse
R3D Flsun I3 Mod Kit Part 3 by JamesK1
by Thingiverse
Last crawled date: 4 years, 1 month ago
R3D Flsun I3 Mod Kit
This is part 3 of 3 of my collection of mods for the Flsun I3 printer.
These are mainly cosmetic and some safety improvements but not critical. Also your setup may not warrant these.
There's a lot in here but I had more than enough spare screws and nuts from the printer build for them. Well, except for the countersink M3 screws I used for the heatbed leveling mounts.
Note that some of these are dependent on specific hardware so please be certain it will fit your needs.
Update 05/22/2017 - Added a new spool holder - 2020 Mounted Spool RollerUpdate 07/23/2017 - Added a 40mm fan shroud + Fang combo for the E3D v6 clone hotend
List of Printed Parts:
PSU Case -- specifically designed around the TriGorilla Mosfet.MKS Controlboard Case -- I designed it around mine which is the MKS Gen_L V1.0. It may fit other MKS boards but I'm not sure. Also there's a couple versions depending on what you may want as far as wiring options.Spool Holder2020 Mounted Spool RollerStubby Parts Cooler -- While I think the fang cooler is a better choice, if you don't have a working parts cooler now, you may want to print the stubby to help print the fang as it can be difficult without a cooler. Or, print very slow with an external fan pointed at your bed.Induction Sensor MountY Bearings Holder for Igus BearingsM3 Double Nut Bed Adjustment KnobE3D v6 Heatsink Fan Shroud (40mm) & 5015_40 Fang Combo -- You may need to use the Stubby cooler to get the fang printed properly. This combo also requires a 40mm fan for the heatsink and 4 x M3x16mm hex screws.
Recommended Hardware
Titan Extruder w/ Bowden adapter
TriGorilla Mosfet
V6 Hotend
E3D V6 Silicon Sock for the heater block - prevents filament from getting stuck on the heater block and burning.
Igus Delrin Linear Bearings
M3 x 35mm Countersunk flat head hex screws - will require a drill to countersink the mounting holes on the aluminum heatbed.
PEI sheet 220mm x 220mm (or 10in x 10in) - I absolutely love this stuff! You may need to cut it to fit.
Aluminum Bed Carriage Plate (RepRap or Winhao Duplicator version).
MKS LV8729 stepper motor driver - Set it to 1/64th per step and the motors are quiet! Well.. much quieter than they used to be. :) Do a lot of research before using these. If you screw something up, I'm not responsible.
608ZZ Skateboard Bearings
=====================================================
Links to Kit Series
Part 1 : http://www.thingiverse.com/thing:2307152
Fixes layer shifting and wobble
Highly Recommended
Part 2 : http://www.thingiverse.com/thing:2307161
Replacement parts for the acrylic pieces that can/will crack over time.
Optional but Recommended
Part 3 : http://www.thingiverse.com/thing:2307169
Cosmetic and Recommended Mods to improve overall look and safety.
Optional
List of original sources that may or may not have been modified
titan extruder mount - http://www.thingiverse.com/thing:2073831
v6 hotend clamp fitting - http://www.thingiverse.com/thing:2130054
radial fan fang parts cooler - http://www.thingiverse.com/thing:2175956
boydrone's parts cooler - http://www.thingiverse.com/thing:2088080
This is part 3 of 3 of my collection of mods for the Flsun I3 printer.
These are mainly cosmetic and some safety improvements but not critical. Also your setup may not warrant these.
There's a lot in here but I had more than enough spare screws and nuts from the printer build for them. Well, except for the countersink M3 screws I used for the heatbed leveling mounts.
Note that some of these are dependent on specific hardware so please be certain it will fit your needs.
Update 05/22/2017 - Added a new spool holder - 2020 Mounted Spool RollerUpdate 07/23/2017 - Added a 40mm fan shroud + Fang combo for the E3D v6 clone hotend
List of Printed Parts:
PSU Case -- specifically designed around the TriGorilla Mosfet.MKS Controlboard Case -- I designed it around mine which is the MKS Gen_L V1.0. It may fit other MKS boards but I'm not sure. Also there's a couple versions depending on what you may want as far as wiring options.Spool Holder2020 Mounted Spool RollerStubby Parts Cooler -- While I think the fang cooler is a better choice, if you don't have a working parts cooler now, you may want to print the stubby to help print the fang as it can be difficult without a cooler. Or, print very slow with an external fan pointed at your bed.Induction Sensor MountY Bearings Holder for Igus BearingsM3 Double Nut Bed Adjustment KnobE3D v6 Heatsink Fan Shroud (40mm) & 5015_40 Fang Combo -- You may need to use the Stubby cooler to get the fang printed properly. This combo also requires a 40mm fan for the heatsink and 4 x M3x16mm hex screws.
Recommended Hardware
Titan Extruder w/ Bowden adapter
TriGorilla Mosfet
V6 Hotend
E3D V6 Silicon Sock for the heater block - prevents filament from getting stuck on the heater block and burning.
Igus Delrin Linear Bearings
M3 x 35mm Countersunk flat head hex screws - will require a drill to countersink the mounting holes on the aluminum heatbed.
PEI sheet 220mm x 220mm (or 10in x 10in) - I absolutely love this stuff! You may need to cut it to fit.
Aluminum Bed Carriage Plate (RepRap or Winhao Duplicator version).
MKS LV8729 stepper motor driver - Set it to 1/64th per step and the motors are quiet! Well.. much quieter than they used to be. :) Do a lot of research before using these. If you screw something up, I'm not responsible.
608ZZ Skateboard Bearings
=====================================================
Links to Kit Series
Part 1 : http://www.thingiverse.com/thing:2307152
Fixes layer shifting and wobble
Highly Recommended
Part 2 : http://www.thingiverse.com/thing:2307161
Replacement parts for the acrylic pieces that can/will crack over time.
Optional but Recommended
Part 3 : http://www.thingiverse.com/thing:2307169
Cosmetic and Recommended Mods to improve overall look and safety.
Optional
List of original sources that may or may not have been modified
titan extruder mount - http://www.thingiverse.com/thing:2073831
v6 hotend clamp fitting - http://www.thingiverse.com/thing:2130054
radial fan fang parts cooler - http://www.thingiverse.com/thing:2175956
boydrone's parts cooler - http://www.thingiverse.com/thing:2088080