Thingiverse
R2-D2 48.3mm PSI Diffuser by sgmorton
by Thingiverse
Last crawled date: 4 years, 1 month ago
Rear PSI Diffuser
This fits the TeeCees with the PVC pipe fitting mount
I sliced in Slic3r with 15% infill honeycomb for the honey comb effect.
I stopped the print just few layers into the pip insert ... you can experiment to see how deep you should go. The deeper you go the more pronounced the honeycomb looks on the bleed thru.
The flange around the outside to give bite to the glue when glued in place. I used E6000 to hold mine in.
I used Sainsmart ABS white for this print.
This fits the TeeCees with the PVC pipe fitting mount
I sliced in Slic3r with 15% infill honeycomb for the honey comb effect.
I stopped the print just few layers into the pip insert ... you can experiment to see how deep you should go. The deeper you go the more pronounced the honeycomb looks on the bleed thru.
The flange around the outside to give bite to the glue when glued in place. I used E6000 to hold mine in.
I used Sainsmart ABS white for this print.