Thingiverse
QX23 Monitor Stand by Jonquilmusic
by Thingiverse
Last crawled date: 3 years ago
Q23 Monitor Stand from Remix
This is a Monitor Stand I made from modifying http://www.thingiverse.com/thing:2050885. I converted the STL from that into a CAD file, lopped off the top, and put a modification to accept a monitor Insert.
I bought this nice monitor MONDO CHEAP on Ebay without a stand. NOT A PROBLEM for a MAKER! The monitor is a HP 2011x and the mounting plate is stamped WF H37G0020-1 A4.
WANNA MAKE ONE? Chances are, you don’t need THIS specific stand. If you think your monitor is a close fit, try chopping it off the top in a design program and print it out on its own before you print the whole thing!
Another thing you can do, is to make a mock up piece that fits your monitor good, do a fill of the pocket in mine and then perform a Boolean operation with your mock-up! I’m uploading a STEP file so that you can import it to most standard cad programs.
I did my original work in Autodesk’s FUSION 360, including STL import, export, and STEP conversion and export. The slot for the Monitor Tongue goes through to the bottom of the cavity for easier support removal. I left the "MAKERBOT" stamp from the original model in-place. I don't know if I'm allowed to remove that from a Remix, or if I was supposed to take it out to prevent the appearance of an endorsement of my work! I'm sure they'll let me know!!!!
This was sliced and coded using ReplicatorG employing 2 shells (3 total) using PLA.
FlashForge Creator Pro (Similar to Makerbot Replicator 2)
Heated Bed 45 Celsius
Blue Painters Tape on bed, no further treatment
Print Temperature 220 degrees Celsius
SUPPORTS ARE REQUIRED to facilitate the building of the Monitor Tongue Cavity!!!!!
Feedrate 40 mm/s
Travel Feedrate 55
(If anybody has more optimum feedrates, please share!)
This is a Monitor Stand I made from modifying http://www.thingiverse.com/thing:2050885. I converted the STL from that into a CAD file, lopped off the top, and put a modification to accept a monitor Insert.
I bought this nice monitor MONDO CHEAP on Ebay without a stand. NOT A PROBLEM for a MAKER! The monitor is a HP 2011x and the mounting plate is stamped WF H37G0020-1 A4.
WANNA MAKE ONE? Chances are, you don’t need THIS specific stand. If you think your monitor is a close fit, try chopping it off the top in a design program and print it out on its own before you print the whole thing!
Another thing you can do, is to make a mock up piece that fits your monitor good, do a fill of the pocket in mine and then perform a Boolean operation with your mock-up! I’m uploading a STEP file so that you can import it to most standard cad programs.
I did my original work in Autodesk’s FUSION 360, including STL import, export, and STEP conversion and export. The slot for the Monitor Tongue goes through to the bottom of the cavity for easier support removal. I left the "MAKERBOT" stamp from the original model in-place. I don't know if I'm allowed to remove that from a Remix, or if I was supposed to take it out to prevent the appearance of an endorsement of my work! I'm sure they'll let me know!!!!
This was sliced and coded using ReplicatorG employing 2 shells (3 total) using PLA.
FlashForge Creator Pro (Similar to Makerbot Replicator 2)
Heated Bed 45 Celsius
Blue Painters Tape on bed, no further treatment
Print Temperature 220 degrees Celsius
SUPPORTS ARE REQUIRED to facilitate the building of the Monitor Tongue Cavity!!!!!
Feedrate 40 mm/s
Travel Feedrate 55
(If anybody has more optimum feedrates, please share!)
Similar models
thingiverse
free
QX23 Monitor Stand Remix of Headphone Stand by Jonquilmusic
...<a href="https://www.amazon.com/s?k=flashforge&linkcode=ll2&tag=tv-printerlink-20&linkid=cf260a0cab2d6b7df5aadcf730b98ad6&language=en_us&ref_=as_li_ss_tl"> flashforge</a> <a href="https://www.amazon.com/flashforge-structure-optimized-platform-extruder/dp/b00i8nm6jo?dchild=1&keywords=creator+pro&qid=1617126931&sr=8-3&linkcode=ll1&tag=tv-printerlink-20&linkid=6854212ca9aa4c47adef6a0f93ef47a3&language=en_us&ref_=as_li_ss_tl"> <a href="https://www.amazon.com/flashforge-structure-optimized-platform-extruder/dp/b00i8nm6jo?dchild=1&keywords=creator+pro&qid=1617126931&sr=8-3&linkcode=ll1&tag=tv-printerlink-20&linkid=6854212ca9aa4c47adef6a0f93ef47a3&language=en_us&ref_=as_li_ss_tl"> creator pro</a></a> (similar to <a href="https://www.amazon.com/makerbot-mp07825eu-replicator-3d-printer/dp/b01lzsuqkl?dchild=1&keywords=makerbot&qid=1618268375&sr=8-1-spons&psc=1&spla=zw5jcnlwdgvkuxvhbglmawvypuezq0znmjlzvfuwszdyjmvuy3j5chrlzelkpuewntcyodkzvem0slzjs1bvuflhjmvuy3j5chrlzefkswq9qta"> makerbot replicator</a> 2) heated bed 45...
thingiverse
free
Makerbot Headphone stand (Remix)
...ree parts with mortise and tennon connections to assemble it.
item was split using fusion 360 and exported as separate stl files.
thingiverse
free
Q11 MIDRANGE HORN by Jonquilmusic
...2 shells (3 total) using pla. flashforge creator pro (similar to makerbot replicator 2) heated bed 45 celsius blue...
thingiverse
free
Q11 TWEETERVILLE by Jonquilmusic
...1 shells (2 total) using pla. flashforge creator pro (similar to makerbot replicator 2) heated bed 45 celsius blue...
thingiverse
free
Monitor stand leg cable hook by rickseiden
... some point, so i recommend printing it with so that the opening you put the leg into is on the bottom and parallel with the bed.
thingiverse
free
Q11 NY Corners by Jonquilmusic
...1 shells (2 total) using pla. flashforge creator pro (similar to makerbot replicator 2) heated bed 45 celsius blue...
thingiverse
free
QX09 Family of Pegboard Shelves by Jonquilmusic
...using pla. no rafts or supports! flashforge creator pro (similar to makerbot replicator 2) heated bed 45 celsius (heated...
thingiverse
free
Gnomedozer, Snap-fit Model by dutchmogul
...the gnomish foreman can be removed from the vehicle. similar to my previous gnome remix, this guy and his...
thingiverse
free
Q13 Micro Studio by Jonquilmusic
...2 shells (3 total) using abs. flashforge creator pro (similar to makerbot replicator 2) no supports or rafts heated...
thingiverse
free
Q11 INPUT & TOGGLE Plates by Jonquilmusic
...2 shells (3 total) using pla. flashforge creator pro (similar to makerbot replicator 2) heated bed 45 celsius blue...
Jonquilmusic
thingiverse
free
Q32 PowerHopper by Jonquilmusic
...
the q32 has a snug fit, and does not slide around. there is a tamper unit that also acts as a temporary hopper-loading wall.
thingiverse
free
Q11 TWEETERVILLE by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
Q11 NY Corners by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
Q11 MIDRANGE HORN by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
Q13 Micro Studio by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
QX35 CNC SHARK Hacks & Mods by Jonquilmusic
...ded for modifications in your cad programs to customize as fits your needs.
printed in pla. use supports for the mounting plate.
thingiverse
free
Q11 INPUT & TOGGLE Plates by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
QX09 Family of Pegboard Shelves by Jonquilmusic
...ric cad format works better for you.
adds:
02/19/17 __ qx09b shelf: for use with the qx08d (see “qx08” family of pegboard hooks)
thingiverse
free
QX03b Cord Wrap System by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
Monitor
thingiverse
free
Monitor Riser
...monitor riser
thingiverse
monitor riser for a 6.5 inch x 8 inch rectangle base monitor.
thingiverse
free
monitor spacer
...monitor spacer
thingiverse
spacer for monitor rod
thingiverse
free
Monitor Tray
...monitor tray
thingiverse
just a simple monitor tray.
thingiverse
free
HelloBaby monitor
...hellobaby monitor
thingiverse
antenna cover for hellobaby baby monitor model: hb24rx
thingiverse
free
Soporte monitor | Monitor Stand by Jarodrisal
...taje es necesario tornillos y tuercas m4.
support for monitor with a height of 10cm. m4 screws and nuts are required for assembly
thingiverse
free
Monitor Union by darkraven1431
...join and hold 2 wall mounted monitors.
monitor: lg 23mp55
the monitors were mounted with the following support monitor wall mount
thingiverse
free
7" LCD Monitor Mount (for monitor) by max1600
...ngiverse
mount for mounting a 7-inch monitor on a regular monitor.
after printing, you need to glue lcd quick rail to lcd mount.
thingiverse
free
Monitor shelf for Samsung monitor U24E590DS by frejer
... samsung monitor u24e590ds by frejer
thingiverse
a perfect fit for samsung monitor u24e590ds, can be used as a mic stand or w/e
thingiverse
free
Monitor stand by LarsBonde
...sbonde
thingiverse
this monitor stand raises the monitor about 7.5 cm and tilts it 12 dgr.
it is fitted to my hp s2231a monitor.
thingiverse
free
Monitor bin(Customizable)
...monitor bin(customizable)
thingiverse
monitor bin for sceptre e275w-19203r ultra thin monitor(customizable)
Stand
thingiverse
free
Stand-stand by Fank86
... all your troubles go away, .1mm at a time!
and no, i did not make this in 15 seconds to poke fun at all the stands on this site.
thingiverse
free
stand
...stand
thingiverse
a stand
thingiverse
free
A stand
...a stand
thingiverse
a stand.
thingiverse
free
Stand
...stand
thingiverse
this is a stand, nothing more !
thingiverse
free
stand
...stand
thingiverse
this is a stand that you can put things on
thingiverse
free
Headset stand with phone stand
...dset stand that doubles as a phone stand, the phone also can be charged while on the stand.
leave a comment if you have feedback
thingiverse
free
hairdryer stand and Curling iron stand
...hairdryer stand and curling iron stand
thingiverse
hairdryer stand and curling iron stand
thingiverse
free
Inbus Stand / Inbuskey Stand
...workshop.
this inbuskeys fitts perfectly in that stand:
8 ; 6 ; 5 ; 4 ; 3 ; 2,5 ; 2
enjoy your print :)
comment below if it works
thingiverse
free
Stand by cmaines
...stand by cmaines
thingiverse
stand
thingiverse
free
stand by Syzguru11
...stand by syzguru11
thingiverse
stand