Thingiverse
QX11 MAGA U-POST SUPPORT by Jonquilmusic
by Thingiverse
Last crawled date: 3 years ago
QX11-MAGA U-Post Support
This is a PRACTICAL example of stuff I do all the time with my 3D Printer. The chances anybody needs this thingy is REMOTE, but you can certainly download and study it, and maybe adopt it to a use you have.
I am putting up a Dog-Fence with 6’ U-posts (4’ when in ground) and welded wire fencing.
The corner posts need to be supported at the corners to act against the force of the fencing.
I have some 6’ sections of ½’ Galvanized Pipe around, and an 1-1/4” Diameter custom cut closet rod, so I’ve designed an adaptor that supports my corners using these dimensions.
The Corner Post Adaptor Fastener Hole is for a ¼”-20 bolt through. 6mm is a tight fit, and you’ll have to drill out the hole in the U-Post to accommodate the slightly larger 6mm machine bolt.
If you’re digging the vibe, here’s my parts list:
U-Posts: https://www.lowes.com/pd/Blue-Hawk-Common-5-in-x-6-ft-Actual-0-6-in-x-5-in-x-6-ft-Powder-Coated-Steel-U-Post-Post/4780967
Closet Pole: https://www.menards.com/main/storage-organization/closet-organizers/closet-organizers-accessories/john-sterling-4-platinum-closet-pole/p-1444436938837-c-12650.htm?tid=4844601706196273649&ipos=5
Galvanized ½” pipe: https://www.lowes.com/pd/Southland-Pipe-1-2-in-x-72-in-150-PSI-Galvanized-Pipe/1000228013
And if you hit a buried ½” copper tubing PROPANE line, this can come in handy: https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/brass-fittings/brass-compression-fittings/1-2-od-lead-free-straight-compression-union/p-1444442651685-c-9433.htm?tid=5634849103712204788&ipos=2
But the real idea here is to design your adaptor to accommodate what you have, or can easily and inexpensively obtain! My set-up is quite sturdy, I must say!
There are holes in the U-Posts that I am going to use to my advantage to secure the corner-brace for the 3-D printed Galvanized-Pipe adaptor. The angle to accomplish my task is 57 degrees out from the post, 33 degrees about the plane of the ground. I’m cutting the 1-1/4 Closet Rod into 1’ lengths to use as stakes to secure the ground side of the 6’ Galvanized-Pipe supports. My corner supports have clearance for the plastic Thread-Protectors on the Black-Pipe. You never know when I might have to steal one for a different project!!!
I made these out of PLA. I would recommend using ABS or something NOT biodegradable because this is an outdoor project. Anyway. It’s what I had.
I created the Bodies in FUSION 360. I’ve exported the bodies as separate STEP files that you may use for manipulating in a CAD environment. Have fun, and MAGA, one Thingi at a time!
-This was sliced and coded using ReplicatorG employing 2 shells (3 total) using PLA.
FlashForge Creator Pro (Similar to Makerbot Replicator 2)
Heated Bed 45 Celsius
Blue Painters Tape on bed, no further treatment
Print Temperature 220 degrees Celsius
Use supports No rafts for PLA.
Feedrate 40 mm/s
Travel Feedrate 55
(If anybody has more optimum feedrates, please share!)
REQUEST: Please help me improve my sharing! STEP files have proven reliable for me to transport file between different CAD platforms. If STEPs are a problem for you, please let me know what other common and relatively generic Cad format works better for you.
This is a PRACTICAL example of stuff I do all the time with my 3D Printer. The chances anybody needs this thingy is REMOTE, but you can certainly download and study it, and maybe adopt it to a use you have.
I am putting up a Dog-Fence with 6’ U-posts (4’ when in ground) and welded wire fencing.
The corner posts need to be supported at the corners to act against the force of the fencing.
I have some 6’ sections of ½’ Galvanized Pipe around, and an 1-1/4” Diameter custom cut closet rod, so I’ve designed an adaptor that supports my corners using these dimensions.
The Corner Post Adaptor Fastener Hole is for a ¼”-20 bolt through. 6mm is a tight fit, and you’ll have to drill out the hole in the U-Post to accommodate the slightly larger 6mm machine bolt.
If you’re digging the vibe, here’s my parts list:
U-Posts: https://www.lowes.com/pd/Blue-Hawk-Common-5-in-x-6-ft-Actual-0-6-in-x-5-in-x-6-ft-Powder-Coated-Steel-U-Post-Post/4780967
Closet Pole: https://www.menards.com/main/storage-organization/closet-organizers/closet-organizers-accessories/john-sterling-4-platinum-closet-pole/p-1444436938837-c-12650.htm?tid=4844601706196273649&ipos=5
Galvanized ½” pipe: https://www.lowes.com/pd/Southland-Pipe-1-2-in-x-72-in-150-PSI-Galvanized-Pipe/1000228013
And if you hit a buried ½” copper tubing PROPANE line, this can come in handy: https://www.menards.com/main/plumbing/rough-plumbing/pipe-tubing-hoses-fittings-accessories/fittings/brass-fittings/brass-compression-fittings/1-2-od-lead-free-straight-compression-union/p-1444442651685-c-9433.htm?tid=5634849103712204788&ipos=2
But the real idea here is to design your adaptor to accommodate what you have, or can easily and inexpensively obtain! My set-up is quite sturdy, I must say!
There are holes in the U-Posts that I am going to use to my advantage to secure the corner-brace for the 3-D printed Galvanized-Pipe adaptor. The angle to accomplish my task is 57 degrees out from the post, 33 degrees about the plane of the ground. I’m cutting the 1-1/4 Closet Rod into 1’ lengths to use as stakes to secure the ground side of the 6’ Galvanized-Pipe supports. My corner supports have clearance for the plastic Thread-Protectors on the Black-Pipe. You never know when I might have to steal one for a different project!!!
I made these out of PLA. I would recommend using ABS or something NOT biodegradable because this is an outdoor project. Anyway. It’s what I had.
I created the Bodies in FUSION 360. I’ve exported the bodies as separate STEP files that you may use for manipulating in a CAD environment. Have fun, and MAGA, one Thingi at a time!
-This was sliced and coded using ReplicatorG employing 2 shells (3 total) using PLA.
FlashForge Creator Pro (Similar to Makerbot Replicator 2)
Heated Bed 45 Celsius
Blue Painters Tape on bed, no further treatment
Print Temperature 220 degrees Celsius
Use supports No rafts for PLA.
Feedrate 40 mm/s
Travel Feedrate 55
(If anybody has more optimum feedrates, please share!)
REQUEST: Please help me improve my sharing! STEP files have proven reliable for me to transport file between different CAD platforms. If STEPs are a problem for you, please let me know what other common and relatively generic Cad format works better for you.
Similar models
thingiverse
free
Corner pipe clamp by nealc10
...monly sold at big box hardware stores. the pipe is supporting a bird house. i used 50% infill and petg for strength (i hope).
thingiverse
free
Candelabra Base Holder by jeplans
...iot-lighting-porcelain-socket-with-10-lead-candelabra-base/7041900/p-1444429521985-c-7491.htm?tid=-2594198157513602235&ipos=1
thingiverse
free
1/2in 3 way pvc fitting
...ide. you can find my 4 way fitting that makes a top frame support in my profile also.
post pictures of your build if you use it.
thingiverse
free
Q11 NY Corners by Jonquilmusic
...1 shells (2 total) using pla. flashforge creator pro (similar to makerbot replicator 2) heated bed 45 celsius blue...
thingiverse
free
Amulet of Ipos by tekomuto
...y models for such purposes, contact me.
selling free models only results in artists releasing less free models. help keep it free
thingiverse
free
Power Distribution / Terminal Block by olson1414
...und-rods-ground-bars-ground-lugs/ge-24-terminal-ground-bar/tgk24cp/p-1444431227318-c-14120.htm?tid=6209532924368106179&ipos=3
thingiverse
free
Motorbike smartphone support adaptor by MOSFET_burnt
..., and a regular nut.
nuts and screws can be fitted using a soldering iron and tighten them up with a screw or nut, respectively.
thingiverse
free
adaptor - fence pole to PVC by mopar99
...s mounted to 1/2 in pvc pipe. enter a 3d printer, design and printed this part. i use a carter pin to hole all 3 pieces together.
thingiverse
free
Fence post support by tunnelplan
... support.
you get stability by using 4 paving slabs (30 x 30 cm).
dimensions of the support 190 x 190 mm and the post 70 x 70 mm.
thingiverse
free
2.5 to 4 in Pipe Saddle by Tidangerous
...e saddle by tidangerous
thingiverse
i printed this to help fit up some corner post i am building. the pipe is 2-1/2 in and 4 in.
Maga
thingiverse
free
MAGA by K-X
...maga by k-x
thingiverse
this is a simple maga logo that can be added to any design.
thingiverse
free
Krav Maga by GyroHeat
...krav maga by gyroheat
thingiverse
this is my remix of the krav maga logo's
thingiverse
free
MAGA by nuggyblake
...maga by nuggyblake
thingiverse
lets trigger some more.............
thingiverse
free
maga oscura ver alternativa by rononoa
...maga oscura ver alternativa by rononoa
thingiverse
maga oscura ver japonesa imprimir verticalmente
thingiverse
free
Maga 2020 Can Koozie by FadedDreamz
...maga 2020 can koozie by fadeddreamz
thingiverse
print and enjoy
thingiverse
free
MAGA (Make America Great Again) by 2ROBOTGUY
...opdtwpdn8
fast and easy print. only 4mm tall. model is scale able.
ideas:
fridge magnet
badge for a car, truck, tractor, boat ect
thingiverse
free
Mintarajz Fogmosó pohár, alsó részen 48mm 16 szög, felső részen 61mm, 10mm kerek peremmel 90mm magas by kameleon2
... by kameleon2
thingiverse
mintarajz fogmosó pohár, alsó részen 48mm 16 szög, felső részen 61mm, 10mm kerek peremmel 90mm magas
thingiverse
free
AnyCubic Maga Tool Holder v3
...s box.
i took the parts of the different tool holders i liked and incoporated them into my design for a right sided tool holder.
thingiverse
free
Maga Hat for sending D1@% PICS.
...d chill. now it's all about tucker and f#@%3r.
and no gentleman, i'm not posting a picture of a build. ladies lets talk.
thingiverse
free
Knife training - Pugnale da allenamento Krav Maga by alezan
...alizzato in due parti separate, da montare con incastro. impugnatura già strutturata al suo interno, stampare con fill almeno 50%
Jonquilmusic
thingiverse
free
Q32 PowerHopper by Jonquilmusic
...
the q32 has a snug fit, and does not slide around. there is a tamper unit that also acts as a temporary hopper-loading wall.
thingiverse
free
Q11 TWEETERVILLE by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
Q11 NY Corners by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
Q11 MIDRANGE HORN by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
Q13 Micro Studio by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
QX35 CNC SHARK Hacks & Mods by Jonquilmusic
...ded for modifications in your cad programs to customize as fits your needs.
printed in pla. use supports for the mounting plate.
thingiverse
free
QX23 Monitor Stand by Jonquilmusic
...ding of the monitor tongue cavity!!!!!
feedrate 40 mm/s
travel feedrate 55
(if anybody has more optimum feedrates, please share!)
thingiverse
free
Q11 INPUT & TOGGLE Plates by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
thingiverse
free
QX09 Family of Pegboard Shelves by Jonquilmusic
...ric cad format works better for you.
adds:
02/19/17 __ qx09b shelf: for use with the qx08d (see “qx08” family of pegboard hooks)
thingiverse
free
QX03b Cord Wrap System by Jonquilmusic
...ms. if steps are a problem for you, please let me know what other common and relatively generic cad format works better for you.
U
thingiverse
free
U
...u
thingiverse
u
thingiverse
free
u by whtse
...u by whtse
thingiverse
u
thingiverse
free
U
...u
thingiverse
i
thingiverse
free
u braket
...u braket
thingiverse
u braket
thingiverse
free
u hook by hsiehty
...u hook by hsiehty
thingiverse
u hook.
thingiverse
free
Letra U by Xbertus
...letra u by xbertus
thingiverse
letra u
thingiverse
free
U tongs by hsiehty
...u tongs by hsiehty
thingiverse
u tongs.
thingiverse
free
U DESK by bfkron
...u desk by bfkron
thingiverse
u desk
thingiverse
free
Mate U by yak_vi
...mate u by yak_vi
thingiverse
mate u.
thingiverse
free
Base and U by MyMicrofactory
...base and u by mymicrofactory
thingiverse
base and u
Post
thingiverse
free
post
...post
thingiverse
this is a post that you can put things on
thingiverse
free
amp_speaker post
...e/screw in place the adapter and restore the correct connections.
update: added a double post, for main/remote speaker connectors
thingiverse
free
Post-it Holder by opablon
...post-it holder by opablon
thingiverse
post- it notes holder (for 9cm x 9cm post-its)
thingiverse
free
Post Shoe by 6brueder
...post shoe by 6brueder
thingiverse
a customizable post shoe to screw a post onto a (wodden) plate.
thingiverse
free
Post sign by Lizard_Wizard
...zard_wizard
thingiverse
a post sign for the post box.
its arial font just edited to look like the an post letters.
extruded 4 mm
thingiverse
free
Post Tower by juergenp
...post tower by juergenp
thingiverse
rough 3d model of post tower (deutsche post dhl) in bonn
thingiverse
free
Post-it holder by Boberle
...post-it holder by boberle
thingiverse
a simple stackable post-it holder for small and medium sized post-its
thingiverse
free
post-it holder by mvrborges0
...post-it holder by mvrborges0
thingiverse
post-it holder
thingiverse
free
posted for a friend. by Addidis
...posted for a friend. by addidis
thingiverse
posted for a friend.
thingiverse
free
Post-it Holder by JaykdaBeast
...post-it holder by jaykdabeast
thingiverse
post-it holder
Support
thingiverse
free
Support filament support by capucinois
...support filament support by capucinois
thingiverse
simple filament support / un support simple pour filament
thingiverse
free
Support rasoir
...support rasoir
thingiverse
support for shaver
support pour rasoir
thingiverse
free
Support for Honor 8 + Support by ZedEau
...y zedeau
thingiverse
support for honor 8 with a support for a car with a coin holder like this onehttp://i.imgur.com/belww0z.jpg
thingiverse
free
Gutter support
...ists and locks into a corresponding track on the conservatory then standard cutter supports drop into the recess on this support.
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
Shaver support
...shaver support
thingiverse
support