Thingiverse
Quinny Zapp xtra 2 Britax adapter by t0ffluss
by Thingiverse
Last crawled date: 4 years, 3 months ago
Finally you can use your Britax infant car seat with your Quinny Zapp xtra 2 stroller.
"It's not pretty, but it'll do the job!"
You will need:
Countersunk: 2x M4x12, 1x M4x25, 1x M4x35, 2x M6x35
Nut: 1 self locking nut, M6
No threading / reaming neccessary. Plug and play. Mount the adapter on either left or right hand side and use cover left or cover right with screws to fix it in place.
Print settings:
227C, PLA
0.3mm layer
15-20% infill.
Printed on Replicator 2.
Disclaimer: I will not be held responsible if you break your child ;)
"It's not pretty, but it'll do the job!"
You will need:
Countersunk: 2x M4x12, 1x M4x25, 1x M4x35, 2x M6x35
Nut: 1 self locking nut, M6
No threading / reaming neccessary. Plug and play. Mount the adapter on either left or right hand side and use cover left or cover right with screws to fix it in place.
Print settings:
227C, PLA
0.3mm layer
15-20% infill.
Printed on Replicator 2.
Disclaimer: I will not be held responsible if you break your child ;)