Thingiverse
Quickmount Reprapdiscount Smart Controller Case by cpayne3d
by Thingiverse
Last crawled date: 4 years, 7 months ago
I designed this case in OpenScad to make a removable case for the Reprapdiscount LCD controller. This case contains a full encapsulated case (top and back), emergency stop button, a mounting bracket for 90-degree printers, and a lock-kit which locks the case to the mounting bracket.
Use your own reprapdiscount knob. The photo shows the following knob http://www.thingiverse.com/thing:172996
The back cover plate contains two nibs inside to prevent the lock from disengaging. The mounting bracket has been coded with mounting holes which match the back plate of the Hadron OrdBot printer. Feel free to drill your own holes to suit your own printer style.
The LCD controller can be installed in two ways:
by mounting the lock plate directly onto the printer' vertical back support
(optional) or by installing the printed risers onto the T-Slot extrusion, then install the lock plate onto the risers. The holes in the risers match with the lock plate.
--- March 14, 2015 Update -----
More changes!
The SCAD file has been updated to include a RISER BRACKET to allow for adjustable height to elevate the LCD above the Z height of the X-axis on a 90degree style of printer.
Print the two new parts: Chris_lcd_riser-Right.stl and Chris_lcd_riser-Left.stl. Install them in the T-Slot of your printer with T-slot nuts. Attach the back plate bracket from of the LCD to this new riser. See the photos for more detail. I hope that you enjoy this LCD case.
Use your own reprapdiscount knob. The photo shows the following knob http://www.thingiverse.com/thing:172996
The back cover plate contains two nibs inside to prevent the lock from disengaging. The mounting bracket has been coded with mounting holes which match the back plate of the Hadron OrdBot printer. Feel free to drill your own holes to suit your own printer style.
The LCD controller can be installed in two ways:
by mounting the lock plate directly onto the printer' vertical back support
(optional) or by installing the printed risers onto the T-Slot extrusion, then install the lock plate onto the risers. The holes in the risers match with the lock plate.
--- March 14, 2015 Update -----
More changes!
The SCAD file has been updated to include a RISER BRACKET to allow for adjustable height to elevate the LCD above the Z height of the X-axis on a 90degree style of printer.
Print the two new parts: Chris_lcd_riser-Right.stl and Chris_lcd_riser-Left.stl. Install them in the T-Slot of your printer with T-slot nuts. Attach the back plate bracket from of the LCD to this new riser. See the photos for more detail. I hope that you enjoy this LCD case.